This is one of the best ignition systems developed specifically for Japanese cars. Why use an American ignition system on your JDM car? HKS is the choice of all JDM Professionals around the world hands down.

Compatible Vehicle Model(s):

-BKEP Axela

-BK3P Mazdaspeed Axela

-GHEFP Atenza

-GY3W Atenza Wagon

-GGEP Atenza Sedan

-GG3P Mazdaspeed Atenza

-NCEC Miata Roadster

*Please specify the vehicle model you wish to purchase this product for at the point of sale.

This is what HKS has to say about the HKS Twin Power Ignition System:

The Twin Power ignition amplifier incorporates both the CDI and transistor method ignition to provide optimum spark duration and maximum voltage output, resulting in crisper throttle response and a smoother engine powerband. The CDI method, capacity discharge ignition, provides maximum voltage by transferring all stored energy in the capacitor to the ignition coil so that the ignition current can buildup quickly, thus making the Twin Power very effective in the higher revs where a normal spark would tend to diminish. This strong rapid spark prevents the high rpm ignition miss that reduces peak power. The transistorized method generates high voltage by using transistors to cut off current to the coil, thus allowing for a long energy discharge. This longer spark duration allows the Twin Power to improve lower RPM throttle response and torque. The combination of the CDI and the transistor method incorporates two distinct systems into one high performance unit, hence the designation of Twin Power. The Twin Power produces a spark output that is typically 1.5-2.5 stronger than of the stock ignition system and consumes about 35% less power input than other ignition amplifiers. Each compact and attractive Twin power unit is constructed of durable anodized aluminum and sealed to prevent corrosion from moisture. General wiring harnesses are included in each unit to aid in installation and mounting.

Vehicle Specific wiring harnesses are also available for certain models to further aid in installations that require intricate integration.(CARB E.O. # D-186-22)

Dimensions: 91mm (L) x 80mm (W) x 34.5mm (H) (All Twin Power Units, except for DLI II)

Weight: Approximately 430g (~15.2oz)

Get this and all your JDM @ RHDJapan!!