HKS Metal Head Gasket Kit - Stopper Type 0.8mm Honda CR-Z ZF1
20069
JPY
HKS
SKU: 66914
PN: 23009-AH001The HKS Metal Head Gasket Kit - Stopper Type 0.8mm Honda CR-Z ZF1 feature the new independent bead design which will furthermore reduces possibility of overheating even combustion gas leakage due to high horsepower. The Gaskets are engineered to resist severe levels of heat that are generated by high-horsepower and high-boost applications. All HKS head gaskets are constructed with multiple layers of steel and coated with a special fluorine rubber to provide exceptional sealing. HKS head gaskets are designed to accommodate standard and certain oversized cylinder bores. The HKS Stopper-Type gasket consists of the maximum layers of plates possible and uses a molded stopper ring around each combustion chamber opening.
Upon purchasing please state the car from the compatibility list that you would like to have the HKS Head Gasket Kit for.
Get this and all your JDM at RHDJapan!!
Upon purchasing please state the car from the compatibility list that you would like to have the HKS Head Gasket Kit for.
Get this and all your JDM at RHDJapan!!
Brand: HKS
Product: Metal Head Gasket Kit - Stopper Type 0.8mm Honda CR-Z ZF1
Part Num: 23009-AH001
FEATURES:
Point 1:
- High engine output parts. Factory replacement type.
- The shape of the exhaust gasket is the same as the factory gasket.
- Improved the bore seal proof stress at high engine output and boost pressure by redesigning the structure without upgrading the head bolt. (Bore seal pressure of the contacted surface was improved by 20%)
- HKS In-house test at 300PS confirmed the durability and safety.
- 2 types of the head gasket kit are available; the 0.8mm type is for the factory replacement, and the 1.2mm type for the compression ratio adjustment.
- The Exhaust Manifold Gasket uses the 3-layer seal bead design (t=0.6). (The factory is 2-layer design (t=0.4))
- The bore size is enlarged to 75.0mm from the 75.0mm factory gasket bore size.
Point 2:
- To maintain the bore seal proof stress, the stoppers height was adjusted. Narrowing the width enables the high proof stress with the factory head bolt axial tension. Also, optimizing the bead plates angle of the oil and water cooling sealing part improved the sealings contact pressure without affecting the bore sealings contact pressure. Fully coated gaskets surface can improve the rigid connection of the engine head and block when installing the gasket.
- The 3-layer exhaust gasket improves sealing durability to be used under high exhaust pressure.
Kit Includes:
- Metal Head Gasket
- Exhaust Manifold Metal gaskets
SPECIFICATIONS:
Bore (mm): 75.5
Compression Ratio: e=8.7
Thickness (mm): 0.8
Product: Metal Head Gasket Kit - Stopper Type 0.8mm Honda CR-Z ZF1
Part Num: 23009-AH001
FEATURES:
Point 1:
- High engine output parts. Factory replacement type.
- The shape of the exhaust gasket is the same as the factory gasket.
- Improved the bore seal proof stress at high engine output and boost pressure by redesigning the structure without upgrading the head bolt. (Bore seal pressure of the contacted surface was improved by 20%)
- HKS In-house test at 300PS confirmed the durability and safety.
- 2 types of the head gasket kit are available; the 0.8mm type is for the factory replacement, and the 1.2mm type for the compression ratio adjustment.
- The Exhaust Manifold Gasket uses the 3-layer seal bead design (t=0.6). (The factory is 2-layer design (t=0.4))
- The bore size is enlarged to 75.0mm from the 75.0mm factory gasket bore size.
Point 2:
- To maintain the bore seal proof stress, the stoppers height was adjusted. Narrowing the width enables the high proof stress with the factory head bolt axial tension. Also, optimizing the bead plates angle of the oil and water cooling sealing part improved the sealings contact pressure without affecting the bore sealings contact pressure. Fully coated gaskets surface can improve the rigid connection of the engine head and block when installing the gasket.
- The 3-layer exhaust gasket improves sealing durability to be used under high exhaust pressure.
Kit Includes:
- Metal Head Gasket
- Exhaust Manifold Metal gaskets
SPECIFICATIONS:
Bore (mm): 75.5
Compression Ratio: e=8.7
Thickness (mm): 0.8
Compatibility is from maker for JDM cars only. We don't guarantee fitment. Always do your own research before purchase. After-sale support does not include installation support.
Honda CR-Z ZF1 LEA-MF6 (02/2010-09/2012)
Honda CR-Z ZF1 LEA-MF6 (02/2010-09/2012)
Product Reviews
“ THE CUSTOMER'S VOICE ”
RHDJapan Store Reviews
Looks amazing Review by Stephen
A really great looking and high quality product. It's a little expensive especially with the import taxes but it was worth it.
Excellent Review by Zizi
Fast shipping and item were well packed.
Good Pad for Golf 7.5 Gti Tcr Review by Marius
I drive this Pad on Nürburgring Nordschleife and Touge Runs. Very good bite and not too much heat in the Brakesystem.
Worth it Review by Christian
Perfect fit and great quality
Amazing Review by Christian
Bought an extra one for the future, as i plan to run the shift knob for a while!