These units are for the following vehicles:

SW20 MR2

HCR32 R32 R33 R34 Skyline

A31 Cefiro

S13 S14 S15 Silvia and 180sx/240sx/200sx

R32 R33 GT-R

300ZX Z32.

Upon purchasing please make sure to specifically say which of the above listed cars you would like the Adjustable Pillow Ball Tension Rods for.These Cusco Adjustable Pillow Ball Tension Rods stop the movement and flex that change the geometry on the front suspension under hard braking and cornering and drifting. These Cusco Adjustable Pillow Ball Tension Rods help with stability and predictability when drifting or racing the car hard. They also improving initial turn-in response. They are designed to work with stock suspension or nearly every aftermarket system available.

This is what Cusco has to say about the units.

FEATURES

Reduces the amount of suspension flex during hard cornering. Increases greatly the handling response going into corners by adopting pillow ball mount on the body side. High rigidity pillow rods balls used to hold down tires under braking. Increases straight line stability by reducing toe out and friction.

FITTING

A simple bolt-on type easily converted from manufacturer's products.

ADJUSTMENTS

The turn buckle type allows simple adjustments with the parts on the car.

DURABILITY

The pillow balls are covered by rubber boots for increased durability.

These are adjustable from +5mm~-9mm on all the vehicles except SW20 MR2 which is +10mm~-10mm. They are packaged with all the necessary hardware to ensure ease of installation.

If you have noticed the amatures on the track trying to drift and wondered why they had so much body roll its because their suspension is not fully tuned. Every drifter here in Japan knows that the suspension should be fully tuned before even thinking of taking the car for serious drifting!