The Ralliart Sports 1-DIN Triple Meter Gauge Kit is 1-DIN sized triple meter for providing information on oil pressure, oil temperature, and boost. "DIN" is an abbreviation for Deutsche Industrie Normen(German industrial standard) and most car audio hardware is designed in the DIN size. The DIN-Gauge kit can be neatly installed in a DIN sized vacant space in your automobile.

-Three gauges are fitted into one DIN size.

-The front cover of the gauge has flat face glass.

-Opening and closing mode: The needle pointers of three gauges move sequentially.

-The three meters are angled towards the driver for a higher level of visibility.

Stepping motor:

-Maximum angle 270degrees is controlled by the microcomputer up to 4,600 divisions(0.057degrees) to provide high precision in the accuracy of information generated.

-Quick response which is sustainable in racing scenes.

-Bright red gauge dials and red instrument needle pointers are used in the gauges to increase visibility at night.

-The lights are produced from super high bright LED lamps.

-DIN-Gauges are available ONLY FOR RIGHT HAND DRIVE VEHICLES (RHD).

-This product is for use ONLY on vehicles with a 12V electrical system.

Compatible Vehicle Models:

-CT9A Lancer Evolution IX MR

-CT9A Lancer Evolution IX

-CT9A Lancer Evolution VIII MR

-CT9A Lancer Evolution VIII

-CT9A Lancer Evolution VII GT-A

-CT9A Lancer Evolution VII

-CP9A Lancer Evolution VI Tommi Makinen Edition

-CP9A Lancer Evolution VI

-CP9A Lancer Evolution V

-CN9A Lancer Evolution IV

-CE9A Lancer Evolution III

-CE9A Lancer Evolution II

-CD9A Lancer Evolution I

-Z27AG Colt Version-R

-Z21A, Z22A, Z23A, Z24A, Z27A Colt

-Z25A, Z26A, Z28A Colt

-Z23W, Z24W, Z27W, Z27WG Colt Plus

-CU2W Airtrek (2.0 Turbo model)

*In order to install this Meter Gauge Kit onto Mitsubishi Colt models, the following Mitsubishi OEM parts will be needed:

-1 eye bolt, Mitsubishi OEM: 1226A003

-1 turbocharger 10x20, Mitsubishi OEM: MD196129

Get this and all your JDM direct from Japan with RHDJapan!