Brand : TOMEI
Product: Expreme Outlet Pipe SR20DET S13 S14 S15
Part Num: 193101 (With EAI)
Part Num: 193060 (Without EAI)
FEATURES:
The genuine turbine outlet diameter is small which causes the secondary exhaust pressure to rise. This in turn results in a loss of power, response & unstable pressure. The TOMEI outlet has a larger internal diameter for the best optimization of exhaust flow efficiency & helps reduce the exhaust pressure substantially. If used in conjunction with our TOMEI ARMS turbine. You will see large gains in all aspects of performance. The corrosion-resistant stainless steel material used in manufacturing this product is good with heat resistance up to the flange.
The larger diameter helps with exhaust ratio improvement & to prevent the unstable deterioration on the secondary exhaust pressure which will greatly affect the response of power.
- The rise in exhaust pressure at higher RPMS is prevented and more power gains are achieved.
- Improved torque & turbine response at lower RPMs.
- The SUS304 material properties have strength, light weight and good rust resistance for both the flange and pipe.
- Without impairing mid range torque, the mm73.2mm diameter type delivers best output results at high RPMS.
- The high intensity lost wax productions method was used to minimize any exhaust leak from the flange.
- High quality pipe bends and production methods were used with superb welding of the flange to deliver the best possible product to you.
- Improved turbine response & a decrease in anti- lag pressure whilst on boost.
- Highly accurate welding, improved reliability & good looks.
Kit Contents:
- Outlet pipe
- Gasket
- Bolts
- Bolt Smooth Paste
- Sticker
- Installation Manual
SPECIFICATIONS:
- Material:
-- Pipe: SUS304
-- Flange: SUS304
- Pipe Dia.(mm): mm73.2
- Pipe Thikness (mm): 2.0
- weight (kg): 1.29 (OEM 2.15)
PRODUCT NOTES:
- Both S14 & S15 don't have the EAI mechanism, So please check carefully and order accordingly.
- Most aftermarket exhaust manifolds are the S14 type.
