This is also referred to as a stabilizer bar, anti-sway, roll bar or anti-roll bar and it will help decrease body roll and sharpen the handling characteristics of your vehicle whether you have the standard OEM suspension to full coil-over suspension. These are an excellent upgrade for anyone looking to increase handling and increase stability in high speeds. Get this and all your JDM at RHDJapan!!
Brand: CUSCO
Product: Rear Sway Stabilizer Bar - S14 S15
Part Num: 223 311 B21
SPECIFICATIONS:
Position: Rear
Nissan Silvia S14
Outer Diameter:
- Standard: 18
- Cusco: 21
Adjustable Type: No
Ratio with Standard:
- 1st Stage: 181%
- 2nd Stage: -
- 3rd Stage: -
Note: bushing included.
Mounting time: 1.0 Hours
Nissan Silvia S15
Outer Diameter:
- Standard: 21
- Cusco: 21
Adjustable Type: No
Ratio with Standard:
- 1st Stage: 160%
- 2nd Stage: -
- 3rd Stage: -
Note: bushing included.
Mounting time: 1.0 Hours
Product: Rear Sway Stabilizer Bar - S14 S15
Part Num: 223 311 B21
SPECIFICATIONS:
Position: Rear
Nissan Silvia S14
Outer Diameter:
- Standard: 18
- Cusco: 21
Adjustable Type: No
Ratio with Standard:
- 1st Stage: 181%
- 2nd Stage: -
- 3rd Stage: -
Note: bushing included.
Mounting time: 1.0 Hours
Nissan Silvia S15
Outer Diameter:
- Standard: 21
- Cusco: 21
Adjustable Type: No
Ratio with Standard:
- 1st Stage: 160%
- 2nd Stage: -
- 3rd Stage: -
Note: bushing included.
Mounting time: 1.0 Hours
Compatibility is from maker for JDM cars only.
We don't guarantee fitment.
Always do your own research before purchase.
Nissan Silvia S14 SR20DET (10/1993-06/1996)
Nissan Silvia S14 SR20DET (06/1996-12/1998)
Nissan Silvia S15 SR20DET (01/1999-08/2002)
Nissan Silvia S14 SR20DET (10/1993-06/1996)
Nissan Silvia S14 SR20DET (06/1996-12/1998)
Nissan Silvia S15 SR20DET (01/1999-08/2002)
Customers who bought this product also purchased
HKS Reinforced Turbo Actuator Upgrade Kit - S14 S15
List Price: ¥14,300
Sale Price: ¥12,659
You Save: ¥1,641
Nismo Reinforced Engine Mount Front Right - S13 S14 S15 SR20
List Price: ¥24,200
Sale Price: ¥20,699
You Save: ¥3,501
HKS Super SQV IV Sequential Blow Off Valve Kit - S14 S15
List Price: ¥32,780
Sale Price: ¥24,299
You Save: ¥8,481
KTS Engine Quake Damper Nissan Silvia S14 S15
List Price: ¥10,780
Sale Price: ¥8,909
You Save: ¥1,871
Product Reviews
Submit a review now and earn 20 Reward points once the review is approved.
Applies only to registered customers, may vary when logged in.
“ THE CUSTOMER'S VOICE ”
RHDJapan Store Reviews
Helps to lock down the rear differential Review by Jeremy
Much stiffer than standard Review by Jeremy
The standard pitch mount and even the enhanced STI pitch mount, still allow some movement, as they are compromised by their bushings which are designed to prevent excessive NVH. This Cusco item is heavily biased towards stopping movement, rather than preventing NVH, so as expected more noise and vibration can be detected (mainly on startup).
Perfect Rear Geometry Review by Jeremy
As standard the GRB Impreza only has a single adjustment for toe, so you basically have no control over the rear geometry. Adjustable lower and toe arms are common, but there are very few adjustable upper rear arms.
This upper arm is the usual Cusco quality, and of course fits perfectly. There are only two things that would make it better. Firstly there are no fixings for the ABS cables, so you have to use zip ties, and secondly the inner bushings are hardened rubber rather than the superior pillow ball.
This upper arm is the usual Cusco quality, and of course fits perfectly. There are only two things that would make it better. Firstly there are no fixings for the ABS cables, so you have to use zip ties, and secondly the inner bushings are hardened rubber rather than the superior pillow ball.
Perfect Review by Mathew
Easy to install, fits well and didn’t rattle
amazing Review by ENRIQUE
great price, amazing service from RHDJapan keeping me updated on my order status through the holiday, impressed with the packaging as well as the part, i can't wait to install the pan on my project build.
The Cusco diff mount being made out of sheet steel formed in to a box structure, combined with stiff bushings, holds the diff tight. For the ultimate lockdown combine this mount with the Rear Differential Mount Collars Part No. 692 928 A, which are installed in the rear subframe.