Cusco Type RS LSD Front Diff 1&1.5 Way - LSD450C - RHDJapan

Cusco Type RS LSD Front Diff 1&1.5 Way - LSD450C

149226 JPY
CUSCO SKU: 82831 PN: LSD 450 C (1&1.5 Way)_172952
Images used may be generic. Actual product may vary.

List Price: ¥187,000

Sale Price: ¥149,226

You Save: ¥37,774

The RS LSD uses a spring technology which keeps differential noises to a minimum, improves durability due to the clutch plates enduring lower pressures, and better lap times from low power loss for any vehicle. With Cusco's long time development of LSD's, they have been able to produce top quality LSD's for a wide selection of different vehicles. Cusco's extensive LSD knowledge and experience has produced some of the most versatile, durable and effective LSD's on the market. In addition, some LSD's can be changed between the different Way configurations for the best results in different race applications.

Here is a description from Cusco explaining the differences between the differential types available for the aftermarket:

One way LSD - specially suited for front wheel drive cars and 4WD car front axles. Activates under acceleration, and acts as a true LSD when the throttle is off. A great chance for improved lap times. A CUSCO original design.

1.5 way LSD - Activates under acceleration while the understeer is less than on the 2 way LSD. Recommended for drivers having difficulty with 2 way LSD understeer and one way LSD braking.

Two way LSD - Recommended on the rear axle for rear drive cars. Activates on both acceleration and deceleration. Recommended for those who prefer hot driving action and big angle drift.

These differentials have the option to be interchangeable between 1& 2 way, 1.5 & 2 way Please select the switchable combination that you would like and the initial way setup.

Get this and all your JDM at RHDJapan!!

Brand: Cusco
Product: Type RS LSD Front Diff
Part Number: LSD 450 C (1&1.5 Way)_172952

Diff Type: ACD
Initial Setting: 1 Way

ONLY for CT9Ws 9/05-12/06
MT use only
Including Side bearing.
For use with mission side bearing LSD 450 SB sold separately.
Included side bearing is ACD side.(LSD 449 SB)

Mitsubishi Lancer Evolution IX CT9A 4G63 (03/2005-03/2007)
Mitsubishi Lancer Evolution VIII CT9A 4G63 (01/2003-02/2005)
Mitsubishi Lancer Evolution Wagon CT9W 4G63 (09/2003-12/2006)

Product Reviews


Submit a review now and earn 20 Reward points once the review is approved.

Applies only to registered customers, may vary when logged in.

Learn more...


RHDJapan Store Reviews

Received the item about a week earlier than the estimated date and the item is beautiful, can't wait to use it!

Probably the best BOV on the market for the BNR32. Rather than just being something you have to figure out where to place, this is a complete replacement for the pipe between the intercooler piping and the throttle chamber. It takes some more work, but requires no modifying, and is completely bolt-on. Definitely a must-have, for the sound alone.

Quality product

I've been using this boost controller for a while now. Easy to setup and mount. Interface is easy to use, but does require a lot of trial and error. It's a good buy based on other ebc's in the market. I've had a hallman boost controller where you can set it once and forget about it, but I needed adjustable pressure settings. This fills all the requirements I need.

awesome parts for a awesome price

Please wait

Please wait...

Your Session is not Valid.

Please Login