Fujitsubo A-R Exhaust Muffler System - BRZ ZD8 GR86 ZN8 - RHDJapan

Fujitsubo A-R Exhaust Muffler System - BRZ ZD8 GR86 ZN8

113449 JPY
FUJITSUBO SKU: 286960 PN: 560-23212

List Price: ¥157,960

Sale Price: ¥113,449

You Save: ¥44,511

A great sports sound and quality performance were the priorities in developing this lineup of mufflers. The high quality construction and enhanced diameter allows for great exhaust flow improving torque and power throughout the whole power band, especially the mid to high RPM zone. Classic visual styling designed to provide a high quality aggressive engine sound, light weight and all around performance. Get this and all your JDM at RHDJapan!!
Brand: Fujitsubo
Product: A-R Exhaust Muffler System - BRZ ZD8 GR86 ZN8
Part Number: 560-23212

Series: A-R (previously Authorize R)
Material: Stainless Steel (SUS304)
Tip Type: Slash
Tip Diameter (mm): 101.6
Pipe Diameter (mm): 65-50.8
Muffler Weight (kg):
- OEM: 16.4
- Fujitsubo: 16.4
Intermediate acceleration (50km/h to 100km/h in M2 gear) (seconds):
- OEM: 2.4
- Fujitsubo: 2.4
Maximum output
- OEM: 164.3kw(223.4ps)/6910rpm
- Fujitsubo: 168.4kw(229.0ps)/6920rpm
Maximum torque
- OEM: 236.2N・m(24.1kg・m)/3160rpm
- Fujitsubo: 242.1N・m(24.7kg・m)/3210rpm
Noise Levels (dB):
- Idling Sound: 56
- Noise Near exhaust (5250rpm): 83
- 3000rpm: 71
- 5000rpm: 81
- Response 4000rpm~6000rpm: 93
- Idling Sound: 68
- Noise Near exhaust (5250rpm): 92
- 3000rpm: 88
- 5000rpm: 85
- Response 4000rpm~6000rpm: 101
Included Items
- Authorize R Exhaust Muffler
- Gasket Packing X2
- Ring Gasket X1
- M10X20 Flange Bolt & Nut Set X2
- M10X35 Bolt SW Nut Set X4

-Manual Transmission only
Compatibility is from maker for JDM cars only. We don't guarantee fitment. Always do your own research before purchase.

Subaru BRZ ZD8 FA24 (08/2021~)
Toyota GR86 ZN8 FA24 (10/2021~)

Product Reviews


Submit a review now and earn 20 Reward points once the review is approved.

Applies only to registered customers, may vary when logged in.

Learn more...


RHDJapan Store Reviews

The standard STI alloy diff mount is a good looking unit, but it has rather soft bushings which are designed to minimize NVH, rather than hold the diff steady.

The Cusco diff mount being made out of sheet steel formed in to a box structure, combined with stiff bushings, holds the diff tight. For the ultimate lockdown combine this mount with the Rear Differential Mount Collars Part No. 692 928 A, which are installed in the rear subframe.

The standard pitch mount and even the enhanced STI pitch mount, still allow some movement, as they are compromised by their bushings which are designed to prevent excessive NVH. This Cusco item is heavily biased towards stopping movement, rather than preventing NVH, so as expected more noise and vibration can be detected (mainly on startup).

As standard the GRB Impreza only has a single adjustment for toe, so you basically have no control over the rear geometry. Adjustable lower and toe arms are common, but there are very few adjustable upper rear arms.

This upper arm is the usual Cusco quality, and of course fits perfectly. There are only two things that would make it better. Firstly there are no fixings for the ABS cables, so you have to use zip ties, and secondly the inner bushings are hardened rubber rather than the superior pillow ball.

Easy to install, fits well and didn’t rattle

great price, amazing service from RHDJapan keeping me updated on my order status through the holiday, impressed with the packaging as well as the part, i can't wait to install the pan on my project build.

Please wait

Please wait...

Your Session is not Valid.

Please Login