Oct 22 is Japan National Holiday, office closed ​

Fujitsubo Legalis R Exhaust Muffler - CL7 - RHDJapan

Fujitsubo Legalis R Exhaust Muffler - CL7

77422 JPY
Images used may be generic. Actual product may vary.
  • Coupon Code:

    Add several items to shopping cart to qualify for a Consolidation Quote request for shipping costs
    Any requests that qualify can also have an additional 5% on the price of all products!
    ~Oct 31

List Price: ¥107,800

Sale Price: ¥77,422

You Save: ¥30,378

This series was developed to provide great exhaust flow improving torque throughout the low and mid RPM range and increased maximum power. The high quality construction and enhanced diameter allows for sporty yet subtle exhaust note. Clean basic design for original classic stainless look. A great cost-performance option with tuning diversity from normal to tuned engines. Get this and all your JDM at RHDJapan!!
Brand: Fujitsubo
Product: Legalis R Exhaust Muffler - CL7
Part Num: 760-54131

Kit Includes:
- 1x Legalis R Exhaust Muffler set
- 1x Gasket Packing
- 3x Gasket Ring
- 6x M10x20 Flange And Nuts set
Tip Type: Round Slash
Tip Diameter: 90.mm
Pipe Diameter: 60.5-50.80mm
Muffler Weight:
- OEM: 22.8kg
- Fujitsubo: 20.3kg

Acceleration (40km/h to 130km/h)
- OEM: 3.7 sec.
- Fujitsubo: 3.6 sec.

Maximum output
- OEM: 149.5kw (203.3ps) / 8150rpm
- Fujitsubo: 152.1kw (206.9ps) / 8180rpm

Maximum Torque
- OEM: 197.0N/m (20.1Kg/m) / 6100rpm
- Fujitsubo: 198.9N/m (20.3Kg/m) / 6190rpm

Noise Levels (dB):
- Idling Sound: 59
- Noise Near exhaust (6000rpm): 82 (Measured at 4900rpm for limiter operation)
- 2000rpm: 68
- 4000rpm: 76
- Response 2000rpm~4000rpm: 82

- Idling Sound: 65
- Noise Near exhaust (6000rpm): 88 (Measured at 4900rpm for limiter operation)
- 2000rpm: 79
- 4000rpm: 83
- Response 2000rpm~4000rpm: 93

- Performance and noise level specs are based on EK3

- Only for Euro R models. Twin Muffler left and right set.

Honda Accord CL7 K20A (10/2002-11/2005)
Honda Accord CL7 K20A (11/2005-11/2008)

Product Reviews


Submit a review now and earn 20 Reward points once the review is approved.

Applies only to registered customers, may vary when logged in.

Learn more...


RHDJapan Store Reviews

Not a perfect fitment for Garage Vary front lip Review by MK
I did the install on my own and noticed that there are gaps where the provided double-sided tape are not able to adhere to the bumper and bcos of that, 1 side has a bigger gap than the other.

As I couldn't accept the gap differences, I have asked a bodywork specialist to re-install for me.
He told me that the front lip is a bit too wide thus one side will always have a bigger gap.
His solution is to secure both ends first and left the center portion at the grille area unsecured for it to flex abit outwards.

It looks ok so far but I am just disappointed with the imperfect fitment quality.
I was expecting a nice fit from Garage Vary though.

Excellent feel, excellent quality. Review by Michael
What a great knob. Feels perfect in my hand. Not bad, good size.

High quality seat bracket to lower your OEM seat Review by Tom
This bracket is a very high quality seat bracket. It'll lower your OEM seat about an inch or so. Perfect for those of us who are 6 ft or taller. For those of you wondering, it'll fit 06+ cars, but you'll need to find a way to mount the airbag sensor. I drilled into the metal and mounted it roughly where it would have been on the stock mount. No airbag light has come on in over a year. Keep in mind that it'll be kinda tough to slide back all the way with this guy too because you'll be essentially sitting as close to the floor as possible. Don't bother beating your seat pan or modding your seats. Either get this or go with aftermarket seats.

Great for preventing overflow spills Review by Tom
These are used to go around your brake master cylinder reservoir or clutch fluid reservoir. They can help prevent spills from overfilling them, or if you happen to break a seal during a race, it'll prevent that nasty brake fluid from getting everywhere. The only real downside is it's hard to tell what your fluid level is at glance.

Cool oil cap with some hidden features Review by Tom
Most people buy oil caps for their looks, but this guy has the added benefit of being able to use any one of the drilled out holes to help keep the oil cap locked down. There are times when racing at the track that the oil filter may come loose, so by tying a metal wire to one of those holes, it can help prevent a nasty oil spill from happening within the engine bay. The larger gasket is also good for helping keep it sealed compared to the stock one.

Please wait

Please wait...

Your Session is not Valid.

Please Login

{{var product.name}}