Fujitsubo Power Getter Exhaust Muffler Burning Gradation Tail - L902S L900S L910S Zenki Chuki - RHDJapan

Fujitsubo Power Getter Exhaust Muffler Burning Gradation Tail - L902S L900S L910S Zenki Chuki

76479 JPY
FUJITSUBO SKU: 140682 PN: Burning Gradation O/P 150-70161
Images used may be generic. Actual product may vary.
 

List Price: ¥103,200

Sale Price: ¥76,479

You Save: ¥26,721


This is a full stainless muffler which is a very high quality unit that gets you more power and gives off a great sound. The increased dimensions of the Fujitsubo exhaust are designed to give you great exhaust flow and an increase in torque and horse power. This also features a pre-muffler/resonator to help muffle engine tones, keeping sound at a reasonable level. This version comes with optional Burning Gradation finish on tail for extra sports touch! Get this and all your JDM at RHDJapan!!
Brand: Fujitsubo
Product: Power Getter Exhaust Muffler Burning Gradation Tail -L902S L900S L910S Zenki Chuki
Part Num: Burning Gradation O/P 150-70161

SPECIFICATIONS:
Made to order 4~6 weeks
Included:
- Power Getter Exhaust Muffler
- Gasket Packing and hardware

Tip Type: Straight (With Hole)
Tip Diameter: 100mm
Pipe Diameter: 45.0mm - 50.8mm
Manifold Weight:
- OEM: 11.7kg
- Fujitsubo: 9.7kg

Acceleration (50km/h to 100km/h)
- OEM: 3.4sec.
- Fujitsubo: 3.3sec.

Maximum output
- OEM: 48.8kw (66.3ps) / 5770rpm
- Fujitsubo: 50.8kw (69.1ps) / 5940rpm

Maximum Torque
- OEM: 98N/m (10.0Kg/m) / 3770rpm
- Fujitsubo: 99N/m (10.1Kg/m) / 3790rpm

Supercharging pressure:
- OEM: 0.95kgf/cm2
- Fujitsubo: 0.97kgf/cm2

Noise Levels (dB):
OEM:
- Idling Sound: 60
- Noise Near exhaust (4800rpm): 83
- 3000rpm: 74
- 5000rpm: 83
- Response 4000rpm~6000rpm: 93

Fujitsubo:
- Idling Sound: 71
- Noise Near exhaust (4800rpm): 92
- 3000rpm: 86
- 5000rpm: 92
- Response 4000rpm~6000rpm: 104

PRODUCT NOTES:
- Performance and noise level specs are based on L910S

COMPATIBILITY NOTES:
Only for L902S Move Aero down custom 2WD
Only for L900S Move Aero down custom 2WD
Only for L910S Move Aero down custom 4WD
Only for L900S Move Aero down RS 2WD
Only for L910S Move Aero down RS 4WD
Daihatsu Move L900S EF-DET (10/2000-09/2001)
Daihatsu Move L900S EF-DET (12/1999-09/2000)
Daihatsu Move L902S JB-DET (10/1998-11/1999)
Daihatsu Move L902S JB-DET (10/2000-09/2001)
Daihatsu Move L902S JB-DET (12/1999-09/2000)
Daihatsu Move L910S EF-DET (10/1998-11/1999)
Daihatsu Move L910S EF-DET (10/2000-09/2001)
Daihatsu Move L910S EF-DET (12/1999-09/2000)

Product Reviews

-/5

Submit a review now and earn 20 Reward points once the review is approved.

Applies only to registered customers, may vary when logged in.

Learn more...

“ THE CUSTOMER'S VOICE ”

RHDJapan Store Reviews

Like it

Thanx

Good for rb26

This item is required when using TRD bushes, as they are slightly shorter than OEM type. All I can really say is that they are hardened and made from the same rubber as the TRD bushes.

These bushes are often ignored due to the cost and difficulty of replacement, but they shouldn't be. my oem bushes were completely worn and causing significant play and movement, so this upgrade transformed the feel of the rear end - so much so that i had to readjust coilover settings to compensate. In terms of value, it is excellent, as these TRD bushes are the same price if not cheaper than inferior aftermarket oem replacements. Note that the TRD bushes are slightly smaller than others, to accommodate the separate trd bush spacer (washer) that is also required to use these.

Please wait

Please wait...

Your Session is not Valid.

Please Login

{{var product.name}}