Fujitsubo Wagolis Exhaust Muffler - SG5 NA Kouki - RHDJapan

Fujitsubo Wagolis Exhaust Muffler - SG5 NA Kouki

49779 JPY
FUJITSUBO SKU: 96244 PN: 460-64521
Images used may be generic. Actual product may vary.

List Price: ¥69,300

Sale Price: ¥49,779

You Save: ¥19,521

This series was developed to provide high exhaust efficiency allowing for smooth linear acceleration feel for Wagon's and Minivan's. The high quality construction and enhanced diameter allows for great exhaust flow providing a bump to torque and power especially in the low to mid RPM zones. Classic visual styling with sporty yet subtle engine sound adds a great touch making car life more enjoyable.
Get this and all your JDM at RHDJapan!!
Brand: Fujitsubo
Product: Wagolis Exhaust Muffler - SG5 NA Kouki
Part Num: 460-64521

Material: Stainless Steel (SUS304)
Tip Type: Round Oval Slash
Tip Diameter (mm): 107x96
Pipe Diameter (mm): 60.5
Muffler Weight (kg):
- OEM: 8.3
- Fujitsubo: 8.7

Included Items
- Wagolis Exhaust Muffler
- Gasket

Intermediate acceleration (50km/h to 100km/h in 2 range gear)
- OEM: 5.0sec.
- Fujitsubo: 4.9sec.

Maximum output
- OEM: 101.5kw(138.0ps)/5880rpm
- Fujitsubo: 103kw(140.1ps)/5830rpm

Maximum Torque
- OEM: 180.3N/m (18.4kg/m)/4550rpm
- Fujitsubo: 185.2N/m (18.9kg/m)/4460rpm

Noise Levels (dB):
- Idling Sound: 53
- Noise Near exhaust (4200rpm): 75
- 3000rpm: 68
- 5000rpm: 79
- Response 4000rpm~6000rpm: 91

- Idling Sound: 55
- Noise Near exhaust (4200rpm): 76
- 3000rpm: 72
- 5000rpm: 79
- Response 4000rpm~6000rpm: 91

- Only compatible with vehicles manufactured after 01/05 and equipped with NA Engine.
Subaru Forester SG5 Applied D EJ20T (01/2005-11/2005)
Subaru Forester SG5 Applied E EJ20T (12/2005-12/2006)
Subaru Forester SG5 Applied F EJ20T (01/2007-11/2007)

Product Reviews


Submit a review now and earn 20 Reward points once the review is approved.

Applies only to registered customers, may vary when logged in.

Learn more...


RHDJapan Store Reviews

Like it


Good for rb26

This item is required when using TRD bushes, as they are slightly shorter than OEM type. All I can really say is that they are hardened and made from the same rubber as the TRD bushes.

These bushes are often ignored due to the cost and difficulty of replacement, but they shouldn't be. my oem bushes were completely worn and causing significant play and movement, so this upgrade transformed the feel of the rear end - so much so that i had to readjust coilover settings to compensate. In terms of value, it is excellent, as these TRD bushes are the same price if not cheaper than inferior aftermarket oem replacements. Note that the TRD bushes are slightly smaller than others, to accommodate the separate trd bush spacer (washer) that is also required to use these.

Please wait

Please wait...

Your Session is not Valid.

Please Login