This will make it possible give the driver a better driving position after interior modifications such as a steering wheel change or seat/seat rail swap, spacing the steering wheel closer to the driver's new position.
Get this and all your JDM at RHDJapan!
Get this and all your JDM at RHDJapan!
Brand: GT-1 Motorsports
Product: Boss Spacer 50mm - Red
Part Number: AX-0005_133192
SPECIFICATIONS:
Available Sizes:
- 50mm
Available Colors:
- Red
PRODUCT NOTES:
- GT-1 Boss Spacers are compatible with Nardi steering wheels. However, the spacers are incompatible with Nardi steering wheel boss kits.
- GT-1 Boss Spacer are order made. Delivery of the product will be approximately 1 week after the order has been made.
Product: Boss Spacer 50mm - Red
Part Number: AX-0005_133192
SPECIFICATIONS:
Available Sizes:
- 50mm
Available Colors:
- Red
PRODUCT NOTES:
- GT-1 Boss Spacers are compatible with Nardi steering wheels. However, the spacers are incompatible with Nardi steering wheel boss kits.
- GT-1 Boss Spacer are order made. Delivery of the product will be approximately 1 week after the order has been made.
Universal
Product Reviews
“ THE CUSTOMER'S VOICE ”
RHDJapan Store Reviews
Great Calendar Review by Krishneil
This was provided as a gift and goes well in my garage.
Works great Review by Krishneil
Works great in my GRS204 Crown to adjust rear camber. Installed together with second upper arm.
Great Item Review by Krishneil
Works great in my GRS204 Crown to adjust rear camber.
Great item by Cusco Review by Krishneil
I used this to add additional negative camber on my JZX110 as the JZX110 version was a little lacking. Putting the JZX100 version on allows much more negative camber (-5 to -7 deg)
Overall a great item for handling Review by Krishneil
Installed this item on my JZX110 and it has provided more feel to the rear of the car.
My only issue I found was 3 of the 4 corners lined up perfectly however 1 corner bolt holes were out by almost 5mm. I had to oval the holes out. Another friend also had a similar issue so please keep this in mind if you are purchasing this for a JZX110.
My only issue I found was 3 of the 4 corners lined up perfectly however 1 corner bolt holes were out by almost 5mm. I had to oval the holes out. Another friend also had a similar issue so please keep this in mind if you are purchasing this for a JZX110.