HKB Sports Boss Kit Hub Adapter - ON-175

Brand: HKB Sports
Product : Boss Kit Hub Adapter - ON-175
Part Number: ON-175
INSTALLATION NOTE:

PRODUCT NOTES:
- W10 PW10 PNW10 SW10 FLWGE50 FLGE50 ATWE50 ATE50 APWE50 APE50 ALWE50 ALE50 E24 SNB14 HB14 FNB14 FB14 EB14 B14 JB14 S14 Y31 CY31 PY31 PAY31 UY31 CUY31: ON-175 is only for vehicles with 3 holes at the back of the OEM steering handle.
- Y31 CY31 PY31 PAY31 UY31 CUY31: For vehicles equipped with telescopic steering, 25mm spacer is necessary for installation.

COMPATIBILITY NOTES:
- W10 PW10 PNW10 SW10: Only for Avenir/Avenir Salut Not compatible with vehicles equipped with airbags 8/95~
- FLWGE50 FLGE50 ATWE50 ATE50 APWE50 APE50 ALWE50 ALE50: Only for Elgrand Not compatible with vehicles equipped with airbags 9/95~
- E24: Only for Caravan/Homy Not compatible with vehicles equipped with airbags 9/95~
- K30 HK30: Only for Crew Not compatible with vehicles equipped with airbags 12/94~
- FB14 FNB14 EB14 B14 SB14 SNB14: Only for Sunny/Lucino Not compatible with vehicles equipped with airbags 2/94~9/95
- WGY60 VRGY60 WRGY60 WYY60: Only for Safari Not compatible with vehicles equipped with airbags 9/95~
- S14: Only for Silvia normal vehicles Not compatible with vehicles equipped with airbags 10/93~5/95
- FPY32 FGY32 FGDY32 FGNY32: Only for Cima Not compatible with vehicles equipped with cruise control Not compatible with vehicles equipped with airbags 9/91~6/96
- C23: Only for Serena after M/C Not compatible with vehicles equipped with cruise control Not compatible with vehicles equipped with airbags 5/94~
- HR33 ENR33 ER33 ECR33: Only for Skyline normal vehicles Not compatible with vehicles equipped with cruise control Not compatible with vehicles equipped with airbags 8/93~1/95
- Y31 CY31 PY31 PAY31 UY31 CUY31: Only for Cedric/Gloria normal vehicles Not compatible with vehicles equipped with steering wheel swithces Not compatible with vehicles equipped with cruise control 6/87~
- Y31 CY31 PY31 PAY31 UY31 CUY31: Only for Cedric/Gloria equipped with telescopic steering Not compatible with vehicles equipped with steering wheel switches Not compatible with vehicles equipped with cruise control 6/87~
INSTALLATION NOTE:
These items are manufactured from either cast or billet aluminum process. Manufactured in conjunction with strict quality assurance practices of ASEA (Autosports & Special Equipment Association) under NAPAC (Nippon Auto Parts Aftermarket Committee). Manufactured to be extremely durable for sports/competition application and brake away under severe impact reducing potential harm to driver.
Incorrect installation may occur during installation especially on tapered tooth type design. If the item is not perfectly lined up or slippage occurs the excess stress my crack under torque load. Please make sure to remove all grease from steering shaft and set the boss kit to its most flush mounting position prior to applying torque.
For any possible claim during installation please follow the installation requirements with video proof.
- Maximum torque set between 3~3.5kg/m.
*Torque wrench operation needs to be done with two hands, one on the handle and one holding perfect center and straight positioning.
**Steering wheel / shaft should be held from turning when being torqued down to get proper readings.
***Torque wrenches for heavy duty operation such a lug nuts can be more difficult to get smaller accurate readings for low torque specification.