HKB Sports Boss Kit Hub Adapter - OT-160

Brand: HKB Sports
Product : Boss Kit Hub Adapter - OT-160
Part Number: OT-160

PRODUCT NOTES:
- JZS141 JZS143 JZS145 GS141 LS141 JZS147 JZS149 UZS141 UZS143 UZS145 UZS147: For vehicles originally equipped with airbag, Airbag Dummy Harness HKB-HT needed, sold separately.
INSTALLATION NOTE:

COMPATIBILITY NOTES:
- JZS147: Only for Arisoto equipped with Coupler type horn wiring Not compatible with vehicles equipped with cruise control or airbags 10/91~7/97
- SW20: Only for MR-2 equipped with Coupler type horn wiring Not compatible with vehicles equipped with airbags 6/96~
- VCV10 MCV20 MCV21: Only for Windom equipped with Coupler type horn wiring Not compatible with vehicles equipped with cruise control or airbags 9/91~
- ST203: Only for Carina ED/Corona ExiV equipped with 4WS or TEMS Not compatible with vehicles equipped with airbags 10/93~
- ST206 ST207: Only for Curren equipped with 4WS Not compatible with vehicles equipped with airbags 10/93~8/95
- JZS141 JZS143 JZS145 GS141 LS141 JZS147 JZS149 UZS141 UZS143 UZS145 UZS147: Only for Crown/Crown Majesta equipped with 4WS or TEMS or airbags Not compatible with vehicles equipped with cruise control 10/91~9/95
- JZA80: Only for Supra equipped with Coupler type horn wiring Not compatible with vehicles equipped with airbags 5/93~
- ST202C ST203 ST202: Only for Celica equipped with 4WS Not compatible with vehicles equipped with airbags 10/93~
- VCV15: Only for Scepter equipped with TEMS Not compatible with vehicles equipped with airbags 9/91~
- VZN185W: Only for Hilux Surf equipped with Coupler type horn wiring Not compatible with vehicles equipped with airbags 12/95~
- SV40: Only for Camry equipped with 4WS or TEMS Not compatible with vehicles equipped with airbags 9/94~12/05
INSTALLATION NOTE:
These items are manufactured from either cast or billet aluminum process. Manufactured in conjunction with strict quality assurance practices of ASEA (Autosports & Special Equipment Association) under NAPAC (Nippon Auto Parts Aftermarket Committee). Manufactured to be extremely durable for sports/competition application and brake away under severe impact reducing potential harm to driver.
Incorrect installation may occur during installation especially on tapered tooth type design. If the item is not perfectly lined up or slippage occurs the excess stress my crack under torque load. Please make sure to remove all grease from steering shaft and set the boss kit to its most flush mounting position prior to applying torque.
For any possible claim during installation please follow the installation requirements with video proof.
- Maximum torque set between 3~3.5kg/m.
*Torque wrench operation needs to be done with two hands, one on the handle and one holding perfect center and straight positioning.
**Steering wheel / shaft should be held from turning when being torqued down to get proper readings.
***Torque wrenches for heavy duty operation such a lug nuts can be more difficult to get smaller accurate readings for low torque specification.