HKS GT2 Supercharger System GT2 7040L System Upgrade Kit - CR-Z ZF1
306409
JPY
HKS
SKU: 148403
PN: 12002-AH003This is a great kit that will allow you to install the included powerful HKS GT Supercharger GTS7040 on your CR-Z. The HKS GT Supercharger GTS7040 with other engine modification can achieve power outputs in excess of 300PS. HKS latest demo car, the Green Monster is equipped with this same kit and has undergone extensive testing at over 285PS* with dyno tests showing capacity for over 300PS!
Upon purchasing please state the car from the compatibility list that you would like to have the HKS GT Supercharger System for.
Get this and all your JDM at RHDJapan!!
Upon purchasing please state the car from the compatibility list that you would like to have the HKS GT Supercharger System for.
Get this and all your JDM at RHDJapan!!
Brand: HKS
Product: GT2 Supercharger System GT2 7040L System Upgrade Kit - CR-Z ZF1
Part Num: 12002-AH003
SPECIFICATIONS:
Kit Includes:
- Supercharger Assy (Pulley not Included and required)
- Supercharger Oil System
- Supercharger Installation Bracket
- Suction Pipe+ Blow off (60mm flange Included)
Kit do not Includes:
- Intercooler ASSY
- Intercooler Pipe
- Brackets
- Fuel Control Parts (F-CON iS+OSC)
- Injectors
- Plugs
Specs to achieve 300ps Tuning:
Supercharger: HKS GTS7040 with 80mm pulley (Max RPM:120, 000rpm)
Exhaust: One of Production, Straight type
Suspension: HKS HIPERMAX SPL Racing Spec
Suction Pipe: One of + 150mm SPF Reloaded
ECU: HKS F-CON V Pro with Specific Harness
Electronics: HKS VAC Type CR-Z
Injectors: HKS 545cc4 (Coupler must be replaced)
Fuel Pump: CZ4A (EVO10) Factory Fuel Pump
Intercooler: S-type AL 60024465 S/P Low press. loss
Oil Cooler: HKS Universal #10 9-layer
Piston and Conrod Kit: HKS Forged Piston Kit + Connecting Rod Set
Head Gasket: HKS 1.2mm Comp. Ratio 8.4
Crank Pulley: Modified Factory Pulley 6-Rib
A/C Comp. Pulley: Modified Factory Pulley 6-Rib
Water Pump Pulley: One of Production
Clutch: LA Clutch Single Plate
Plugs: HKS M45i4
Engine Oil: HKS SUPER RACING 0W25
Tires: YOKOHAMA S.drive 215/45/R17
Wheels: YOKOHAMA ADVAN RacingRS 7.5J Off-set+48
Brake: ENDLESS Takumi Chibi 6 Caliper Kit
Other: Engine Bore, Water hole-Dowel pin hole, Port Polished
Notes from HKS:
1. For safety precautions and product warranty liabilities, the maximum RPM should not exceed 110, 000 rpm. HKS will not be responsible for any damage caused by use this product beyond the maximum RPM limit.
2. The HP5-10 harness is for the F-CON iS; therefore, to use with the F-Con V Pro, modifications to the harness and F-Con V Pro are required. Refer to the modification instruction included with the harness.
FEATURES:
- Selectable pulley diameter from 80mm to 100mm (not Included). Flexible pipes layout.
- The engine output can be increased over 300ps with upgrading the engine internals and pulley, adjusting the restrictor, etc.
Product: GT2 Supercharger System GT2 7040L System Upgrade Kit - CR-Z ZF1
Part Num: 12002-AH003
SPECIFICATIONS:
Kit Includes:
- Supercharger Assy (Pulley not Included and required)
- Supercharger Oil System
- Supercharger Installation Bracket
- Suction Pipe+ Blow off (60mm flange Included)
Kit do not Includes:
- Intercooler ASSY
- Intercooler Pipe
- Brackets
- Fuel Control Parts (F-CON iS+OSC)
- Injectors
- Plugs
Specs to achieve 300ps Tuning:
Supercharger: HKS GTS7040 with 80mm pulley (Max RPM:120, 000rpm)
Exhaust: One of Production, Straight type
Suspension: HKS HIPERMAX SPL Racing Spec
Suction Pipe: One of + 150mm SPF Reloaded
ECU: HKS F-CON V Pro with Specific Harness
Electronics: HKS VAC Type CR-Z
Injectors: HKS 545cc4 (Coupler must be replaced)
Fuel Pump: CZ4A (EVO10) Factory Fuel Pump
Intercooler: S-type AL 60024465 S/P Low press. loss
Oil Cooler: HKS Universal #10 9-layer
Piston and Conrod Kit: HKS Forged Piston Kit + Connecting Rod Set
Head Gasket: HKS 1.2mm Comp. Ratio 8.4
Crank Pulley: Modified Factory Pulley 6-Rib
A/C Comp. Pulley: Modified Factory Pulley 6-Rib
Water Pump Pulley: One of Production
Clutch: LA Clutch Single Plate
Plugs: HKS M45i4
Engine Oil: HKS SUPER RACING 0W25
Tires: YOKOHAMA S.drive 215/45/R17
Wheels: YOKOHAMA ADVAN RacingRS 7.5J Off-set+48
Brake: ENDLESS Takumi Chibi 6 Caliper Kit
Other: Engine Bore, Water hole-Dowel pin hole, Port Polished
Notes from HKS:
1. For safety precautions and product warranty liabilities, the maximum RPM should not exceed 110, 000 rpm. HKS will not be responsible for any damage caused by use this product beyond the maximum RPM limit.
2. The HP5-10 harness is for the F-CON iS; therefore, to use with the F-Con V Pro, modifications to the harness and F-Con V Pro are required. Refer to the modification instruction included with the harness.
FEATURES:
- Selectable pulley diameter from 80mm to 100mm (not Included). Flexible pipes layout.
- The engine output can be increased over 300ps with upgrading the engine internals and pulley, adjusting the restrictor, etc.
Compatibility is from maker for JDM cars only. We don't guarantee fitment. Always do your own research before purchase. After-sale support does not include installation support.
Honda CR-Z ZF1 LEA-MF6 (02/2010-09/2012)
Honda CR-Z ZF1 LEA-MF6 (02/2010-09/2012)
Product Reviews
“ THE CUSTOMER'S VOICE ”
RHDJapan Store Reviews
Looks amazing Review by Stephen
A really great looking and high quality product. It's a little expensive especially with the import taxes but it was worth it.
Excellent Review by Zizi
Fast shipping and item were well packed.
Good Pad for Golf 7.5 Gti Tcr Review by Marius
I drive this Pad on Nürburgring Nordschleife and Touge Runs. Very good bite and not too much heat in the Brakesystem.
Worth it Review by Christian
Perfect fit and great quality
Amazing Review by Christian
Bought an extra one for the future, as i plan to run the shift knob for a while!