HKS GTII 8267 Series Final Edition Turbine Turbocharger - T25 Flange Type
333749
JPY
HKS
SKU: 259983
PN: 14001-AK047This is the perfected final version of the GTII series externally wastegated turbochargers. Along with the highest power and best performance rating from the GTII lineup the final version also comes with a new MD black coating providing an amazing aesthetics improvement. Available in both the T25 4-bolt and 3-bolt type triangle flanges commonly used on exhaust manifolds. Get this and all your JDM at RHDJapan!!
Brand: HKS
Product: GTII 8267 Series Final Edition Turbine Turbocharger - T25 Flange Type
Part Num: 14001-AK047
SPECIFICATIONS:
Series: GTII 8267 Final Edition
Max Power (ps): 600
Flange Type: T25 (4-Bolt)
Center Cartridge Type: CHRA
Housing Coat: MD Black
Compressor Wheel:
-Trim:
-Intake Diameter (mm):
-Outlet Diameter (mm):
Compressor Housing (mm)*
-Intake Diameter (mm):
-Outlet Diameter (mm):
Turbine Wheel:
-Trim:
-Outer Diameter (mm):
-Outlet Diameter (mm):
Exhaust Housing (A/R): 0.75
JAN Code: 4957266621981
PRODUCT NOTES:
Gaskets included, water and oil lines need to be purchased separately
Product: GTII 8267 Series Final Edition Turbine Turbocharger - T25 Flange Type
Part Num: 14001-AK047
SPECIFICATIONS:
Series: GTII 8267 Final Edition
Max Power (ps): 600
Flange Type: T25 (4-Bolt)
Center Cartridge Type: CHRA
Housing Coat: MD Black
Compressor Wheel:
-Trim:
-Intake Diameter (mm):
-Outlet Diameter (mm):
Compressor Housing (mm)*
-Intake Diameter (mm):
-Outlet Diameter (mm):
Turbine Wheel:
-Trim:
-Outer Diameter (mm):
-Outlet Diameter (mm):
Exhaust Housing (A/R): 0.75
JAN Code: 4957266621981
PRODUCT NOTES:
Gaskets included, water and oil lines need to be purchased separately
Compatibility is from maker for JDM cars only. We don't guarantee fitment. Always do your own research before purchase. After-sale support does not include installation support.
Universal
Universal
Product Reviews
Submit a review now and earn 20 Reward points once the review is approved.
Applies only to registered customers, may vary when logged in.
“ THE CUSTOMER'S VOICE ”
RHDJapan Store Reviews
Amazing Review by Richard
Excellent addition to my 800hp B18 LS / Vtec build. Super fast shipping to United States
Car Garage Amis Pod - FD2 Review by Blake
I've paired this with the Defi A1 guages. Two fit snug just fine and one slot was too loose, I used electrical tape to hold to the guage in place. Now the position of the pod causes reflections in the windscreen so I put defi meter visors on but only cover half of the Gauge appearing on the windscreen so will need to get some 3D printed super long visors to not get any reflections as it becomes real bad at night. However on track the position of the guages is perfect and easy to monitor during racing.
best seller Review by Denny
RHD top best seller.
Very low dust, no noise and great pedal feel Review by Thomas
The Endless SSM+ brake pads was exactly what I was looking for in a brake pad. These pads have good modulation, are very low dust and is silent. My previous pads on the Brembo calipers had good initial bite but were super dusty and had ridiculously loud squealing, these pads aren't cheap but the switch was worth it! RHD Japan support was also top notch in assisting in my inquires!
Great handling and engine bay dress up mod Review by Thomas
The Beatrush strut bar is a great addition to the mx-5 handling performance keeping the car stable during cornering. It was easy to install and the integrated brake cylinder stopper is a great addition. The gold and aluminium also looks great and stands out in the engine bay!
