HKS Suspension - Hipermax D' NOB Spec - Silvia S15 - RHDJapan

HKS Suspension - Hipermax D' NOB Spec - Silvia S15

196500 JPY
HKS SKU: 63893
Images used may be generic. Actual product may vary.
  • Coupon Code: GoldenWeek&EndSpecials

    Additional 6~% on ALL items this brand until the end of the Golden Week ~May 7!
In Stock

List Price: ¥246,240

Special Price ¥196,500

You Save: ¥49,740


Brand: HKS
Product: Suspension - Hipermax D' NOB Spec
Part Num: 80015-AN103

FEATURES:
- Single Tube Type
- Ride Height adjustable Lower Bracket Type
- Straight Spring
- Large Diameter Piston
- 30 Steps Damping Force Adjustment
- Changeable Specification

SPECIFICATIONS:
Designed Application: Drift Model

- General Specification -
Damping Force Adjustment:
- Front: 30
- Rear: 30

Height Adjustable Lower Bracket:
- Front: Yes
- Rear: Yes

Upper Mount:
- Front: Spherical Bearing
- Rear: Spherical Bearing

Inverted/Normal Type:
- Front: Inverted
- Rear: Normal

Damper/Spring Layout:
- Front: Coilover
- Rear: Coilover

Spring Rate Change at factory:
- Front: Possible
- Rear: Possible

Damping force adjustable with Wire:
- Front: -
- Rear: Yes

Helper Spring (Spring Rate N/mm):
- Front: -
- Rear: Yes (19.8N/mm)

- Ride Height Specification (Actual data depends on each vehicle) -
Adjustable Range High - Low (mm):
- Front: 677~597
- Rear: 682~566
- Note: Adjustable range (However, the lowest value may not be road legal. Even within the adjustable range, car body, arm etc. may contact. In such case, it will be hard to drive. Damper oil leakage or any other problems caused by low ride height setting from the factory setting will void the warranty of the product.)

Drivable Range High - Low (mm):
- Front: 670~624
- Rear: 682~581
- Note: Drivable range that there is no contact of car body or arms etc. (However, change of tire/wheel size may cause a problem.)

- Springs Specification -
Spring Rate N/mm (kgf/mm):
- Front: 78(8)
- Rear: 59(6)

Free Height (mm):
- Front: 200
- Rear: 200

Spring Type:
- Front: Straight
- Rear: Straight

Recommended Range to change Spring Rate N/mm (kgf/mm):
- Front: +/-20(2)
- Rear: +/-20(2)

- Damper Specification -
Damper Force (Rebound/Damping):
- Front: 696/412
- Rear: 942/197
- Note: Damping force is at piston speed 0.1m/sec.

Default position of Dial:
- Front: 15
- Rear: 15

Remaining Damper Stroke (Rebound/Damping) (mm):
- Front: 29/70
- Rear: 74/62

PRODUCT NOTES:
- Ride Height Values are from road surface to fender arch
- 2Way Pillow Upper Mount type, Camber adjustment Range: 305' ~ 525'

Nissan Silvia S15 SR20DE (01/1999-08/2002)
Nissan Silvia S15 SR20DET (01/1999-08/2002)
The HKS Suspension - Hipermax D' NOB Spec Nissan Silvia S15 aim is to be the perfect balance of traction and slide control and has HKS`s experience and know-how to satisfy both amateurs and professionals. D1 Champion and JGTC racer, Nobuteru Taniguchi was also brought in for development advice and the end result is touted by HKS to be the perfect set of drift spec coilovers for anybody.

Get this and all your JDM at RHDJapan!!

Product Reviews

-/5

Submit a review now and earn 20 Reward points once the review is approved.

Applies only to registered customers, may vary when logged in.

Learn more...

“ THE CUSTOMER'S VOICE ”

RHDJapan Store Reviews

Oh boy Japan has a muscle car Review by Carlos
First of all, Dam are those lobes big! The quality finish is perfect with a nitrided treatment to give it longevity! As I was not sure if I wanted to get something so radical but after I had it... It felt like I had a Samurai sword really to make a name for my built. The camshaft comes with a paper that we in the USA call cam card but its kind of difficult to translate mechanical terms.

WPC bearing FTW! Review by Carlos
If you have not gotten the WPC Rod bearings I suggest you get those and you get these. Makes a huge difference having very low friction on rotational parts. The finish on the bearing is flawless and well packaged.

Plays well Review by Alex
From Japan to Italy, everything arrived perfectly packed, excellent quality, excellent yield!

Subpar Carbon piece, disappointing Review by Robin
For a JDM cf piece, I expected at least decent weave, good fitment, minimal flaws. This is one of the worst CF pieces I've ever received, and it's not even a knockoff! Fitment required I heat up the corners first, and still does not fit very well. Lots of bubbles, random weave mistakes, cracked in lots of places. Looks good from far away, but would not recommend.

Try finding aftermarket motor mounts of our S30 Review by Carlos
I wanted some motor mounts that will fit right up to the stock placements without any mods and these Kameari motor mounts were the ones. The finish quality of the rubber is much stiffer than the OEM plus they look pretty cool when they're on and they say Kameari on the side.

Please wait

Please wait...

Your Session is not Valid.

Please Login

{{var product.name}}