HPI EVOLVE Sidetank Engine Oil Cooler Kit - GR Yaris GXPA16
122269
JPY
HPI
SKU: 271474
PN: HPOCE-GXPA16This oil cooler kit is designed as a straight forward vehicle specific bolt on application with ideal layout and core size. The EVOLVE Side Tank series is designed with advanced inner and outer fin design along with the addition of side tanks allows for increased oil capacity and superior cooling performance. In addition to high polished stylish end tank design these are lighter and have lower pressure loss in comparison to the standard type kits. Ideal for tuning vehicles to maintain cool oil and water temperatures allowing the for optimum engine performance while also protecting your internal engine components from the damages associated with overheating. Oil block mounts in between oil filter and standard mount location equipped with thermostat and fitting port for easy attachment for aftermarket Oil Temperature / Pressure meters. Get this and all your JDM at RHDJapan!!
Brand: HPI
Product: EVOLVE Sidetank Engine Oil Cooler Kit - GR Yaris GXPA16
Part Number: HPOCE-GXPA16
SPECIFICATIONS:
Series: Evolve
Material: Aluminum
Core Type: W5
Core Size (mm): 620X150X50
O-Ring Size (mm): 65/70
End Tank Type: Side Tank
Fin Design:
-Inner: Turbulator
-Outer: Wave
Fittings: AN10 Banjo
Oil Attachment: Wax Type Internal Thermostat
PRODUCT NOTES:
- Oil Volume increase 1.0~1.2L
- Slight modification required for fit.
Product: EVOLVE Sidetank Engine Oil Cooler Kit - GR Yaris GXPA16
Part Number: HPOCE-GXPA16
SPECIFICATIONS:
Series: Evolve
Material: Aluminum
Core Type: W5
Core Size (mm): 620X150X50
O-Ring Size (mm): 65/70
End Tank Type: Side Tank
Fin Design:
-Inner: Turbulator
-Outer: Wave
Fittings: AN10 Banjo
Oil Attachment: Wax Type Internal Thermostat
PRODUCT NOTES:
- Oil Volume increase 1.0~1.2L
- Slight modification required for fit.
Compatibility is from maker for JDM cars only. We don't guarantee fitment. Always do your own research before purchase. After-sale support does not include installation support.
Toyota GR Yaris GXPA16 G16E-GTS (09/2020~)
Toyota GR Yaris GXPA16 G16E-GTS (09/2020~)
Customers who bought this product also purchased
CUSCO Adjustable Rear Upper Arms - GR Corolla GZEA14H GR Yaris GXPA16
List Price: ¥53,900
Sale Price: ¥39,949
You Save: ¥13,951
CUSCO Adjustable Rear Lower Arm Set Front Side - GR Corolla GZEA14H GR Yaris GXPA16
List Price: ¥44,000
Sale Price: ¥32,609
You Save: ¥11,391
CUSCO Center Lock Pillow Ball Upper Mount - GR Yaris GXPA16 MXPA12 Yaris KSP210 MXPA10 MXPH10
List Price: ¥38,500
Sale Price: ¥28,529
You Save: ¥9,971
HKS Engine Cover Dry Carbon Fiber - GR Yaris GXPA16
List Price: ¥63,800
Sale Price: ¥54,549
You Save: ¥9,251
Product Reviews
Submit a review now and earn 20 Reward points once the review is approved.
Applies only to registered customers, may vary when logged in.
“ THE CUSTOMER'S VOICE ”
RHDJapan Store Reviews
Helps to lock down the rear differential Review by Jeremy
Much stiffer than standard Review by Jeremy
The standard pitch mount and even the enhanced STI pitch mount, still allow some movement, as they are compromised by their bushings which are designed to prevent excessive NVH. This Cusco item is heavily biased towards stopping movement, rather than preventing NVH, so as expected more noise and vibration can be detected (mainly on startup).
Perfect Rear Geometry Review by Jeremy
As standard the GRB Impreza only has a single adjustment for toe, so you basically have no control over the rear geometry. Adjustable lower and toe arms are common, but there are very few adjustable upper rear arms.
This upper arm is the usual Cusco quality, and of course fits perfectly. There are only two things that would make it better. Firstly there are no fixings for the ABS cables, so you have to use zip ties, and secondly the inner bushings are hardened rubber rather than the superior pillow ball.
This upper arm is the usual Cusco quality, and of course fits perfectly. There are only two things that would make it better. Firstly there are no fixings for the ABS cables, so you have to use zip ties, and secondly the inner bushings are hardened rubber rather than the superior pillow ball.
Perfect Review by Mathew
Easy to install, fits well and didn’t rattle
amazing Review by ENRIQUE
great price, amazing service from RHDJapan keeping me updated on my order status through the holiday, impressed with the packaging as well as the part, i can't wait to install the pan on my project build.
The Cusco diff mount being made out of sheet steel formed in to a box structure, combined with stiff bushings, holds the diff tight. For the ultimate lockdown combine this mount with the Rear Differential Mount Collars Part No. 692 928 A, which are installed in the rear subframe.