HPI Front Mount Intercooler Kit Evolve Type-WF Black Hose Spring Clamp - GC8
69349
JPY
HPI
SKU: 114021
PN: HPICE-S0104The Type-WF intercooler kit has been developed to provide the best combination of low pressure loss, light weight and high power output. Redesigned with inner wave fine insuring low pressures loss and improved response. Outer louver fin and edging outer tube heat dissipation and cooling properties. Complete aluminum construction with revised welding for ultimate weight reduction. Optional spring clamp hose bands included for superior strength in sealing. Now available with different options for silicone hose colors! Get this and all your JDM at RHDJapan!!
Brand: HPI
Product: Front Mount Intercooler Kit Evolve Type-WF
Part Num: HPICE-S0104 (OLD: HPICE-7GC8)
SPECIFICATIONS:
Type: WF
Core Layers: 2
Core Size(LxWxD): 500mm x 270mm x 72mm
Hose Band: Spring Clamp
Silicone Hose: Black Evolve Logo
Piping: Aluminum
PRODUCT NOTES:
-slight modifications to bumper, reinforcement and body required for proper installation
-License plate will need to be relocated
COMPATIBILITY NOTES:
Applied Model A~C
Product: Front Mount Intercooler Kit Evolve Type-WF
Part Num: HPICE-S0104 (OLD: HPICE-7GC8)
SPECIFICATIONS:
Type: WF
Core Layers: 2
Core Size(LxWxD): 500mm x 270mm x 72mm
Hose Band: Spring Clamp
Silicone Hose: Black Evolve Logo
Piping: Aluminum
PRODUCT NOTES:
-slight modifications to bumper, reinforcement and body required for proper installation
-License plate will need to be relocated
COMPATIBILITY NOTES:
Applied Model A~C
Subaru Impreza WRX GC8 Applied A EJ20G (11/1992-09/1993)
Subaru Impreza WRX GC8 Applied B EJ20G (10/1993-08/1994)
Subaru Impreza WRX GC8 Applied C EJ20G (09/1994-09/1996)
Subaru Impreza WRX GC8 Applied B EJ20G (10/1993-08/1994)
Subaru Impreza WRX GC8 Applied C EJ20G (09/1994-09/1996)
Product Reviews
Submit a review now and earn 20 Reward points once the review is approved.
Applies only to registered customers, may vary when logged in.
“ THE CUSTOMER'S VOICE ”
RHDJapan Store Reviews
Nice nismo Review by Ahmed
Like it
I like RHDJapan Review by Ahmed
Thanx
I like Review by Ahmed
Good for rb26
It's a necessary piece of rubber Review by kuuko
This item is required when using TRD bushes, as they are slightly shorter than OEM type. All I can really say is that they are hardened and made from the same rubber as the TRD bushes.
Replacing these bushes was long overdue Review by kuuko
These bushes are often ignored due to the cost and difficulty of replacement, but they shouldn't be. my oem bushes were completely worn and causing significant play and movement, so this upgrade transformed the feel of the rear end - so much so that i had to readjust coilover settings to compensate. In terms of value, it is excellent, as these TRD bushes are the same price if not cheaper than inferior aftermarket oem replacements. Note that the TRD bushes are slightly smaller than others, to accommodate the separate trd bush spacer (washer) that is also required to use these.
