HPI Front Mount Intercooler Kit Evolve Type-WF Blue Hose Standard Hose Band - JZX110
50919
JPY
HPI
SKU: 114039
PN: HPICE-T0601The Type-WF intercooler kit has been developed to provide the best combination of low pressure loss, cost performance, light weight and high power output. Redesigned with inner wave fine insuring low pressures loss and improved response. Outer louver fin and edging outer tube heat dissipation and cooling properties. Complete aluminum construction with revised welding for ultimate weight reduction. Standard hose bands are provided for high quality cost performance sealing. Now available with different options for silicone hose colors! Get this and all your JDM at RHDJapan!!
Brand: HPI
Product: Front Mount Intercooler Kit Evolve Type-WF
Part Num: HPICE-T0601 (OLD: HPICE-7JZX110)
SPECIFICATIONS:
Type: WF
Core Layers: 2
Core Size(LxWxD): 500mm x 270mm x 72mm
Hose Band: Standard Hose Clamp
Silicone Hose: Blue Evolve Logo
Piping: Aluminum
PRODUCT NOTES:
-slight modifications to bumper, reinforcement and body required for proper installation
Product: Front Mount Intercooler Kit Evolve Type-WF
Part Num: HPICE-T0601 (OLD: HPICE-7JZX110)
SPECIFICATIONS:
Type: WF
Core Layers: 2
Core Size(LxWxD): 500mm x 270mm x 72mm
Hose Band: Standard Hose Clamp
Silicone Hose: Blue Evolve Logo
Piping: Aluminum
PRODUCT NOTES:
-slight modifications to bumper, reinforcement and body required for proper installation
Toyota Verossa JZX110 1JZ-GTE (07/2001-11/2004)
Product Reviews
Submit a review now and earn 20 Reward points once the review is approved.
Applies only to registered customers, may vary when logged in.
“ THE CUSTOMER'S VOICE ”
RHDJapan Store Reviews
Great Calendar Review by Krishneil
This was provided as a gift and goes well in my garage.
Works great Review by Krishneil
Works great in my GRS204 Crown to adjust rear camber. Installed together with second upper arm.
Great Item Review by Krishneil
Works great in my GRS204 Crown to adjust rear camber.
Great item by Cusco Review by Krishneil
I used this to add additional negative camber on my JZX110 as the JZX110 version was a little lacking. Putting the JZX100 version on allows much more negative camber (-5 to -7 deg)
Overall a great item for handling Review by Krishneil
Installed this item on my JZX110 and it has provided more feel to the rear of the car.
My only issue I found was 3 of the 4 corners lined up perfectly however 1 corner bolt holes were out by almost 5mm. I had to oval the holes out. Another friend also had a similar issue so please keep this in mind if you are purchasing this for a JZX110.
My only issue I found was 3 of the 4 corners lined up perfectly however 1 corner bolt holes were out by almost 5mm. I had to oval the holes out. Another friend also had a similar issue so please keep this in mind if you are purchasing this for a JZX110.
