Weekend Specials WTAC Edition! ~Oct 23 here

HPI STD-Spec Front Mount Intercooler Kit - GC8 Zenki - RHDJapan

HPI STD-Spec Front Mount Intercooler Kit - GC8 Zenki

54424 JPY
HPI SKU: 55658
Images used may be generic. Actual product may vary.

List Price: ¥68,200

Sale Price: ¥54,424

You Save: ¥13,776


This is a great cost-performance based high quality upgrade intercooler from HPI.
The STD-Spec has been developed for street to hard sports applications with standard to actuator type upgrade turbines. Brand new design, insuring low pressures loss, and the newly developed wave pattern inner fin optimizes the cooling ability to the maximum, thanks to the super lightweight core. Minimizing pressure loss, efficient cooling, and light weight design. Those 3 factors are the optimized and balanced in this new HPI Intercooler kit.
Get this and all your JDM at RHDJapan!!
Brand: HPI
Product: STD-Spec Front Mount Intercooler Kit - GC8 Zenki
Part Num: HPIC-7GC8

SPECIFICATIONS:
Type: 2 Layers 600mm

COMPATIBILITY NOTES:
- GC8: Only for Zenki Models

FEATURES:
Tested & Proved in D1 Grand Prix, Rally & Time attack.
- V type top & bottom plate insure a highly durable structure.
- Inner aluminum wave pattern fins.
- Lightweight aluminum core
- Direct heat dispersal, all the way from turbine exit to throttle entrance.
- Outer louver fins
- Anti-rust coating
- Lightweight side tank (with a smooth polished surface).


Subaru Impreza WRX GC8 Applied A EJ20G (11/1992-09/1993)
Subaru Impreza WRX GC8 Applied B EJ20G (10/1993-08/1994)
Subaru Impreza WRX GC8 Applied C EJ20G (09/1994-09/1996)

Product Reviews

-/5

Submit a review now and earn 20 Reward points once the review is approved.

Applies only to registered customers, may vary when logged in.

Learn more...

“ THE CUSTOMER'S VOICE ”

RHDJapan Store Reviews

Not a perfect fitment for Garage Vary front lip Review by MK
I did the install on my own and noticed that there are gaps where the provided double-sided tape are not able to adhere to the bumper and bcos of that, 1 side has a bigger gap than the other.

As I couldn't accept the gap differences, I have asked a bodywork specialist to re-install for me.
He told me that the front lip is a bit too wide thus one side will always have a bigger gap.
His solution is to secure both ends first and left the center portion at the grille area unsecured for it to flex abit outwards.

It looks ok so far but I am just disappointed with the imperfect fitment quality.
I was expecting a nice fit from Garage Vary though.

Excellent feel, excellent quality. Review by Michael
What a great knob. Feels perfect in my hand. Not bad, good size.

High quality seat bracket to lower your OEM seat Review by Tom
This bracket is a very high quality seat bracket. It'll lower your OEM seat about an inch or so. Perfect for those of us who are 6 ft or taller. For those of you wondering, it'll fit 06+ cars, but you'll need to find a way to mount the airbag sensor. I drilled into the metal and mounted it roughly where it would have been on the stock mount. No airbag light has come on in over a year. Keep in mind that it'll be kinda tough to slide back all the way with this guy too because you'll be essentially sitting as close to the floor as possible. Don't bother beating your seat pan or modding your seats. Either get this or go with aftermarket seats.

Great for preventing overflow spills Review by Tom
These are used to go around your brake master cylinder reservoir or clutch fluid reservoir. They can help prevent spills from overfilling them, or if you happen to break a seal during a race, it'll prevent that nasty brake fluid from getting everywhere. The only real downside is it's hard to tell what your fluid level is at glance.

Cool oil cap with some hidden features Review by Tom
Most people buy oil caps for their looks, but this guy has the added benefit of being able to use any one of the drilled out holes to help keep the oil cap locked down. There are times when racing at the track that the oil filter may come loose, so by tying a metal wire to one of those holes, it can help prevent a nasty oil spill from happening within the engine bay. The larger gasket is also good for helping keep it sealed compared to the stock one.

Please wait

Please wait...

Your Session is not Valid.

Please Login

{{var product.name}}