This is a set of Impul Coil Springs from Nissan parts specialist, Impul. Drop the ride height of your car without having to purchase Coilovers! These springs offer approximately a 2 ~ 4cm drop in ride height and are a great entry-level step to increasing handling performance while retaining near Stock OEM ride comfort.
Get this and all your JDM at RHDJapan!!
Get this and all your JDM at RHDJapan!!
Brand: Impul
Product: Coil Spring Set F77/R77 - CKV36
Part Number: SF-77/SR-77
SPECIFICATIONS:
Included: Front & Rear
PRODUCT NOTES:
-CKV36: with 4WAS models
Product: Coil Spring Set F77/R77 - CKV36
Part Number: SF-77/SR-77
SPECIFICATIONS:
Included: Front & Rear
PRODUCT NOTES:
-CKV36: with 4WAS models
Nissan Skyline Coupe CKV36 VQ37VHR (11/2007-11/2008)
Nissan Skyline Coupe CKV36 VQ37VHR (12/2008~)
Nissan Skyline Coupe CKV36 VQ37VHR (12/2008~)
Product Reviews
Submit a review now and earn 20 Reward points once the review is approved.
Applies only to registered customers, may vary when logged in.
“ THE CUSTOMER'S VOICE ”
RHDJapan Store Reviews
Great Calendar Review by Krishneil
This was provided as a gift and goes well in my garage.
Works great Review by Krishneil
Works great in my GRS204 Crown to adjust rear camber. Installed together with second upper arm.
Great Item Review by Krishneil
Works great in my GRS204 Crown to adjust rear camber.
Great item by Cusco Review by Krishneil
I used this to add additional negative camber on my JZX110 as the JZX110 version was a little lacking. Putting the JZX100 version on allows much more negative camber (-5 to -7 deg)
Overall a great item for handling Review by Krishneil
Installed this item on my JZX110 and it has provided more feel to the rear of the car.
My only issue I found was 3 of the 4 corners lined up perfectly however 1 corner bolt holes were out by almost 5mm. I had to oval the holes out. Another friend also had a similar issue so please keep this in mind if you are purchasing this for a JZX110.
My only issue I found was 3 of the 4 corners lined up perfectly however 1 corner bolt holes were out by almost 5mm. I had to oval the holes out. Another friend also had a similar issue so please keep this in mind if you are purchasing this for a JZX110.
