Kameari SPL Piston Ring Set L6 Titanium Coating 89.25 Cast - Racing
42134
JPY
KAMEARI
SKU: 137838
PN: L6A002This item has been developed by Kameari to produce maximum performance. Using their special titanium coating and beveled edge design, Kameari has produced a piston ring, that outperforms its stock equivalent 10 times over.
Get this and all your JDM at RHDJapan!!
Get this and all your JDM at RHDJapan!!
Brand: KAMEARI
Product: SPL Piston Ring Set L6 Titanium Coating 89.25 Cast - Racing
Part Num: L6A002
SPECIFICATIONS:
Piston diameter: 89.25
Ring: 1.2-1.2-2.8
FEATURES:
- Titanium Coating
Set Includes:
- Top Rings
- Second Rings
- Oil Rings
COMPATIBILITY NOTES:
- For L6 engine mounting with cast Kameari Racing Pistons.
Product: SPL Piston Ring Set L6 Titanium Coating 89.25 Cast - Racing
Part Num: L6A002
SPECIFICATIONS:
Piston diameter: 89.25
Ring: 1.2-1.2-2.8
FEATURES:
- Titanium Coating
Set Includes:
- Top Rings
- Second Rings
- Oil Rings
COMPATIBILITY NOTES:
- For L6 engine mounting with cast Kameari Racing Pistons.
Nissan Cedric/Gloria 330 L28 (01/1976-01/1979)
Nissan Cedric/Gloria 430 L28 (01/1979-01/1983)
Nissan Fairlady Z S30 L28 (09/1975-07/1978)
Nissan Fairlady Z S30 L28 (10/1971-08/1975)
Nissan Laurel KNC230 L28 (01/1977-10/1978)
Nissan Laurel KNC231 L28 (11/1978-11/1980)
Nissan Laurel NC230 L28 (01/1977-10/1978)
Nissan Laurel NC231 L28 (11/1978-11/1980)
Nissan Cedric/Gloria 430 L28 (01/1979-01/1983)
Nissan Fairlady Z S30 L28 (09/1975-07/1978)
Nissan Fairlady Z S30 L28 (10/1971-08/1975)
Nissan Laurel KNC230 L28 (01/1977-10/1978)
Nissan Laurel KNC231 L28 (11/1978-11/1980)
Nissan Laurel NC230 L28 (01/1977-10/1978)
Nissan Laurel NC231 L28 (11/1978-11/1980)
Product Reviews
Submit a review now and earn 20 Reward points once the review is approved.
Applies only to registered customers, may vary when logged in.
“ THE CUSTOMER'S VOICE ”
RHDJapan Store Reviews
Nice nismo Review by Ahmed
Like it
I like RHDJapan Review by Ahmed
Thanx
I like Review by Ahmed
Good for rb26
It's a necessary piece of rubber Review by kuuko
This item is required when using TRD bushes, as they are slightly shorter than OEM type. All I can really say is that they are hardened and made from the same rubber as the TRD bushes.
Replacing these bushes was long overdue Review by kuuko
These bushes are often ignored due to the cost and difficulty of replacement, but they shouldn't be. my oem bushes were completely worn and causing significant play and movement, so this upgrade transformed the feel of the rear end - so much so that i had to readjust coilover settings to compensate. In terms of value, it is excellent, as these TRD bushes are the same price if not cheaper than inferior aftermarket oem replacements. Note that the TRD bushes are slightly smaller than others, to accommodate the separate trd bush spacer (washer) that is also required to use these.
