5 NEW HKS Campaigns listed on
Blog

Nismo Rear Member Brace Set - BCNR33 BNR34 - RHDJapan

Nismo Rear Member Brace Set - BCNR33 BNR34

31037 JPY
NISMO SKU: 50540 PN: 55450-RRR45
Images used may be generic. Actual product may vary.
Stock Confirmed: Standard ETA
 

List Price: ¥36,300

Sale Price: ¥31,037

You Save: ¥5,263


This is composed of 4 strengthened arms that can be added (does not replace) to your existing rear arms. The front arm connects between the rear A arm and rear traction rod. The rear arm connects between the rear traction rod and rear upper arm. All of this will make for a very stiff ride perfect for circuit racing. These arms work so well that they were even installed onto the rare Nismo R34 GT-R Z-tune. Get this and all your JDM at RHDJapan!!
Brand: Nismo
Product: Rear Member Brace Set - BCNR33 BNR34
Part Num: 55450-RRR45

FEATURES:
Attached to the rear suspension link of the rear suspension member, the brace improves rigidity, and controls changes to alignment due to deflection of the suspension member. By bringing out the true potential of the suspension, it improves cornering and traction performance. And by installing the brace, changes to the car are more directly transmitted to the driver, so settings are more immediately understood.

SPECIFICATIONS:
- Material: STKM (high-carbon steel tubing)
- Tubing diameter: 25.4
- Painting: silver
- Bent section: reinforcement to increase rigidity

PRODUCT NOTES:
- To ensure the improved rigidity of the rear suspension member, we recommend that rear suspension mount bushings (55442-RS5801 four units required per vehicle) also be installed at the same time.
- Due to vehicle aging and deterioration, gaps may begin to appear between the brace and the attachment points on the vehicle member. If this occurs, it is suggested that the brace be replaced by a new unit. Installation made when there is too great an offset between the parts, or when made with insufficient torque, can result in damage to the suspension link and member.
Nissan Skyline GT-R BCNR33 RB26DETT (01/1995-01/1996)
Nissan Skyline GT-R BCNR33 RB26DETT (01/1996-02/1997)
Nissan Skyline GT-R BCNR33 RB26DETT (02/1997-05/1998)
Nissan Skyline GT-R BNR34 RB26DETT (01/1999-08/2000)
Nissan Skyline GT-R BNR34 RB26DETT (08/2000-10/2000)
Nissan Skyline GT-R BNR34 RB26DETT (10/2000-08/2002)

Product Reviews

-/5

Submit a review now and earn 20 Reward points once the review is approved.

Applies only to registered customers, may vary when logged in.

Learn more...

“ THE CUSTOMER'S VOICE ”

RHDJapan Store Reviews

Great product, looks super strong compared to a standard one. Plus the price including shipping was less than a standard bearing in the UK!

Great parts that fit great and look great once installed. Very fast delivery too!

Great replacement product. The car is stiffer through the corner.

Overall these TEMS shocks are very well made. Beware of few things though. These shocks are harder damped than stock. Also I found that the spring perch sits a little bit higher than originals, causing the ride height on the front to go up higher by roughly 20mm with old stock springs. I highly recommend you to buy lowering springs if you want to use these.
after a few months usage, i bought RSR down ti2000 to match with these.

Do not have to worry about getting fake products.

Please wait

Please wait...

Your Session is not Valid.

Please Login

{{var product.name}}