OS Giken GT Street Master Clutch Flywheel Twin Metal Hard Cover - BNR32 Kouki BCNR33
39501
JPY
OS GIKEN
SKU: 149697
PN: Flywheel-GT2CD-BNR32Kouki-BCNR33This is a Replacement Flywheel and can be used on the specific Clutch Kit from OS Giken. Please make sure that the compatibility is correct before placing your order. Get this and all your JDM at RHDJapan!!
Brand: OS Giken
Product: GT Street Master Clutch Flywheel Twin Metal Hard Cover - BNR32 Kouki BCNR33
Part Num: Flywheel-GT2CD-BNR32Kouki-BCNR33
SPECIFICATIONS:
Included: 1 Flywheel
Specifications of the Clutch Kit:
System: Push
Damper: Spring
Type: Aluminum Cover Hard
Number of Discs: Twin
Disc Outer Diameter: 215mm
HP support: ~500HP
PRODUCTS NOTES:
-
-
COMPATIBILITY NOTES:
- Not compatible with BNR32 Zenki
Similar Foreign Market Clutch P/N:
- NS201-BQ6
- NS201-BP6
Product: GT Street Master Clutch Flywheel Twin Metal Hard Cover - BNR32 Kouki BCNR33
Part Num: Flywheel-GT2CD-BNR32Kouki-BCNR33
SPECIFICATIONS:
Included: 1 Flywheel
Specifications of the Clutch Kit:
System: Push
Damper: Spring
Type: Aluminum Cover Hard
Number of Discs: Twin
Disc Outer Diameter: 215mm
HP support: ~500HP
PRODUCTS NOTES:
-
-
COMPATIBILITY NOTES:
- Not compatible with BNR32 Zenki
Similar Foreign Market Clutch P/N:
- NS201-BQ6
- NS201-BP6
Nissan Skyline GT-R BCNR33 RB26DETT (01/1995-01/1996)
Nissan Skyline GT-R BCNR33 RB26DETT (01/1996-02/1997)
Nissan Skyline GT-R BCNR33 RB26DETT (02/1997-05/1998)
Nissan Skyline GT-R BNR32 RB26DETT (02/1993-12/1994)
Nissan Skyline GT-R BNR32 RB26DETT (08/1991-02/1993)
Nissan Skyline GT-R BCNR33 RB26DETT (01/1996-02/1997)
Nissan Skyline GT-R BCNR33 RB26DETT (02/1997-05/1998)
Nissan Skyline GT-R BNR32 RB26DETT (02/1993-12/1994)
Nissan Skyline GT-R BNR32 RB26DETT (08/1991-02/1993)
Product Reviews
Submit a review now and earn 20 Reward points once the review is approved.
Applies only to registered customers, may vary when logged in.
“ THE CUSTOMER'S VOICE ”
RHDJapan Store Reviews
Nice nismo Review by Ahmed
Like it
I like RHDJapan Review by Ahmed
Thanx
I like Review by Ahmed
Good for rb26
It's a necessary piece of rubber Review by kuuko
This item is required when using TRD bushes, as they are slightly shorter than OEM type. All I can really say is that they are hardened and made from the same rubber as the TRD bushes.
Replacing these bushes was long overdue Review by kuuko
These bushes are often ignored due to the cost and difficulty of replacement, but they shouldn't be. my oem bushes were completely worn and causing significant play and movement, so this upgrade transformed the feel of the rear end - so much so that i had to readjust coilover settings to compensate. In terms of value, it is excellent, as these TRD bushes are the same price if not cheaper than inferior aftermarket oem replacements. Note that the TRD bushes are slightly smaller than others, to accommodate the separate trd bush spacer (washer) that is also required to use these.
