RECARO Base Frame Seat Rail Standard Type Left - Jimny JA12W JA22W JB32W

Brand: Recaro
Product: Base Frame Seat Rail Standard Type Left - Jimny JA12W JA22W JB32W
Part Num: 2088.014.1

SPECIFICATIONS:
Type: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).

PRODUCT NOTES:
- Seat position: height is same as　OEM seat.(A case of Style-JJ)In case of installation of the lowest position,it need to cut the legs of the slide rail because slide rails interfere with the floor.
- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.
- IS-84 LX(Including JP ERGOMED series),LS,LT=On center console side, need to change from normal reclining dial to thin type recliner dial(option ＜product number 1600090J＞) and on door side, need to change from normal reclining dial to rubber cap (option ＜product number 1600091J＞).　In case of round type recliner dial, these seats cannot be installed. SR-3,4,5=there is 10mm interference between seat shoulder and B-pillar, and there is 20mm interference between seat backrest and door armrest. On center console side, need to change from normal reclining dial to thin type recliner dial(option ＜product number 1600090J＞) and on door side, need to change from normal reclining dial to rubber cap (option ＜product number 1600091J＞).RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0/5/10mm). Interference can be reduced by adjustment.

COMPATIBILITY NOTES:
Fits the following seats:
- LX / LX-# / LX-VS / LX-VF / ERGOMED / ERGOMED C/ ERGOMED D/ ERGOMED E / ERGOMED LD / ERGOMED MV (Based on IS-84 structure): In the LX, LS, LT, and SR, replace the recliner dial on the center console side with a thin recliner dial (sold separately; 2200Yen), to avoid (alleviate) interference with the car. Remove the recliner dial on the door side to avoid (alleviate) interference with the car; after removing the recliner dial, install a rubber cap (sold separately; 1100Yen). LX and LS with a round recliner dial cannot be installed.
- LX-F (Based on IS-05 structure)
- LS / LS-# / LT-#: In the LX, LS, LT, and SR, replace the recliner dial on the center console side with a thin recliner dial (sold separately; 2200Yen), to avoid (alleviate) interference with the car. Remove the recliner dial on the door side to avoid (alleviate) interference with the car; after removing the recliner dial, install a rubber cap (sold separately; 1100Yen). LX and LS with a round recliner dial cannot be installed.
- New Orthopead (with RECARO Vent)
- RCS: A separate side adapter must be provided.
- SR-2 late model / SR-3 / SR-4 / SR-5: In the LX, LS, LT, and SR, replace the recliner dial on the center console side with a thin recliner dial (sold separately; 2200Yen), to avoid (alleviate) interference with the car. Remove the recliner dial on the door side to avoid (alleviate) interference with the car; after removing the recliner dial, install a rubber cap (sold separately; 1100Yen). LX and LS with a round recliner dial cannot be installed.
- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC
- AM19 TREND-JS
- AM19 STYLE-JS
- AM19 SPORT-JS
- AM19 STYLE-D AM19 STYLE-DC
- SR-6 / SR-7 / SR-7F / SR-11
- Armrest: 2 or 3