HKS Super Hybrid Filter Campaign

Sard Fuel Rail Delivery Pipe 8mm - CN9A CP9A CT9A - RHDJapan

Sard Fuel Rail Delivery Pipe 8mm - CN9A CP9A CT9A

18059 JPY
SARD SKU: 64466 PN: 63660
Images used may be generic. Actual product may vary.

List Price: ¥26,400

Sale Price: ¥18,059

You Save: ¥8,341

This item is designed to help support proper supply of additional fuel improving the integrity of the fuel system while also allowing a good base on which to build a custom fuel delivery setup. Different fittings can be used to adapt custom fuel lines and the addition of fuel regulators and pressure meters can easily be plugged into the rail. Increased volume within the rail helps to keep a supply of fuel readily available and high quality construction helps to keep a clean and secure installation.
Get this and all your JDM from RHDJapan.
Brand: SARD
Type : Fuel Rail Delivery Pipe - CN9A CP9A CT9A
Part Num: 63660

Material: Aluminum
Color: Anodized Gold
Fuel Line Fitting Size: 8mm
Fuel Injector Fitting Size: 10.5mm

Compatible Injectors:
- 534cc Low Impedance (Sard Part Num: 63501)
- 550cc High Impedance (Sard Part Num: 63506)
- 650cc High Impedance (Sard Part Num: 63562)
- 650cc Low Impedance (Sard Part Num: 63563)
- 660cc Low Impedance (Sard Part Num: 63502)
- 700cc Low Impedance (Sard Part Num: 63500)
- 800cc High Impedance (Sard Part Num: 63565)
- 800cc Low Impedance (Sard Part Num: 63566)
- 1000cc Low Impedance (Sard Part Num: 63514)
- 1000cc Low Impedance (Sard Part Num: 63518)
Mitsubishi Lancer Evolution IV CN9A 4G63 (08/1996-12/1997)
Mitsubishi Lancer Evolution IX CT9A 4G63 (03/2005-03/2007)
Mitsubishi Lancer Evolution V CP9A 4G63 (01/1998-12/1998)
Mitsubishi Lancer Evolution VI CP9A 4G63 (01/1999-11/1999)
Mitsubishi Lancer Evolution VII CT9A 4G63 (02/2001-12/2002)
Mitsubishi Lancer Evolution VIII CT9A 4G63 (01/2003-02/2005)

Product Reviews

2.5 /5

Submit a review now and earn 20 Reward points once the review is approved.

Applies only to registered customers, may vary when logged in.

Learn more...

Not a direct OE replacement
Not a good review unfortunately, This is listed for cp9a and ct9a versions of the Mitsubishi Evo 4-9

This will mount on to the intake manifold but that is it. The fuel delivery pipe from standard uses a 2 bolt flange, this part requires either an -8 male feed or use the provided adaptor and compression jubilee clip onto the pipe itself. neither is compatible with the standard fuel delivery from factory, adaptions to the fuel delivery pipe from the fuel filter (cp9a) will be required.

The latter is not good enough for 3.5bar+ fuel pressure.
Please wait

Please wait...

Your Session is not Valid.

Please Login