Sard Racing Silicone Hosing 4mm X 2m - Silver - RHDJapan

Sard Racing Silicone Hosing 4mm X 2m - Silver

1238 JPY
SARD SKU: 110612 PN: 75170
Images used may be generic. Actual product may vary.

List Price: ¥1,980

Sale Price: ¥1,238

You Save: ¥742

This roll of Genuine SARD Silicone Hosing has a variety of uses under the hood. Each order will provide 4mm (inside diameter) hosing at 2 meters of length of your desired color.
SARD provides a great array of different colors and the hosing is highly durable which can withstand temperatures of -65 to 290 degrees Centigrade (-85 to 554 degrees Fahrenheit) and 5bar of pressure (72psi).
This hosing will come in handy when installing an aftermarket Blow Off Valve, Boost Controller, Boost/Vacum Meters and will also replace vacumn lines/radiator overflow hose while always dressing up the engine bay (please be aware of the size that you need before ordering as 6mm is also commonly used).
Get these and all your JDM direct from Japan with RHDJapan!
Brand: Sard
Product: Silicone Hose
Part Num: 75170

Diameter : 4mm (inside)
Length : 2 meters
Temperature : -65 ~ 290 C (-85 to 554 F)
Pressure : 5 bar (72psi)
Color: Silver

Product Reviews


Submit a review now and earn 20 Reward points once the review is approved.

Applies only to registered customers, may vary when logged in.

Learn more...


RHDJapan Store Reviews

I've been using this boost controller for a while now. Easy to setup and mount. Interface is easy to use, but does require a lot of trial and error. It's a good buy based on other ebc's in the market. I've had a hallman boost controller where you can set it once and forget about it, but I needed adjustable pressure settings. This fills all the requirements I need.

awesome parts for a awesome price

Very High quality and Perfect fit ... I was Impress by the quality and easy to install ... even if no instruction is provide ... but well if you don't figure it out your not suppose to do it :) Recommend +++

The Greddy SPec LS Kit is a great value for money. You can expect a high-quality product which includes all the required fittings for an excellent price. I would recommend the spec LS to anyone looking for an affordable kit that has everything needed to upgrade.

Not a good review unfortunately, This is listed for cp9a and ct9a versions of the Mitsubishi Evo 4-9

This will mount on to the intake manifold but that is it. The fuel delivery pipe from standard uses a 2 bolt flange, this part requires either an -8 male feed or use the provided adaptor and compression jubilee clip onto the pipe itself. neither is compatible with the standard fuel delivery from factory, adaptions to the fuel delivery pipe from the fuel filter (cp9a) will be required.

The latter is not good enough for 3.5bar+ fuel pressure.

Please wait

Please wait...

Your Session is not Valid.

Please Login