Tomei Valve Springs Set Toyota SW20 ST202 - RHDJapan

Tomei Valve Springs Set Toyota SW20 ST202

22572 JPY
TOMEI SKU: 57079 PN: 163026
Images used may be generic. Actual product may vary.
 

List Price: ¥26,400

Sale Price: ¥22,572

You Save: ¥3,828


The TOMEI Valve Springs Set Toyota SW20 ST202 is required to transfer the exact movement of the camshaft to the valves at high engine speeds on high performance engines. Tomei`s extremely advanced manufacturing process of these springs increases reliability at high RPM`s and will reduce surging, jumping, bouncing, sagging and fatigue.

These items are on `special order` and normally ship in 3-5 working days.

Upon purchasing please state the car from the compatibility list that you would like to have the TOMEI Valve Springs for.

Get this and all your JDM at RHDJapan!!
Brand: Tomei
Product: Valve Springs Set Toyota SW20 ST202
Part Num: 163026

FEATURES:
High quality designed springs is required to transfer the exact movement of the camshaft to the valves at high engine speeds on high performance engines. The Tomei products are always engineered with precision in mind to suit the users needs. So with this in mind careful choices in material selection is made with surface coating and other technologies. Then the pre-production products are put through an extensive testing program for checking durability, quality and performance. We spend time and money to help you save your valuable time and money.

- Reliability in high RPM, and improvement in an initial response.
- High durability against metal fatigue.
- High durability against the shocks from jump and bounce.
- High durability against surging.
- High sag resistance.

- Multi Coil Unequal Pitch Springs:
By combining several steps of spring rates into the one spring and vibration frequency becomes amazingly high. This greatly minimizes resonance and the chances of surging.

- Advanced Oil Tempered Chromium-silicone Alloy Steel Core:
Oil tempered chromium-silicone alloy steel wire is used which is considered to be the best material for springs for performance applications and evolved it even further. Combined with a new optimized design, not only did we make it tougher, we also succeeded in suppressing valve jumps or bounce even when raising the engines speeds RPM limit.

- Nitriding:
The surface treatment method for making nitrogen permeates the spring and gives it large surface compression repulsion. This method was chosen to raise the fatigue limit to suit the demands or running high lift camshafts. The dangers of spring failure is greatly reduced with the 1.5 times increase in the springs fatigue limit with the combined use of Oil tempered chromium-silicone alloy steel wire and Nitriding. This is how our valve springs are suitable for use on extreme engine speed conditions of super-high revs exceeding 10, 000 RPM which had not been previously possible with high lift camshafts.

- Shot Peening:
A process that strikes many small steel balls onto the surface of the spring at high speeds is made to enhance the surface of the spring to raise its fatigue limit. Although it has been carried out earlier during the manufacturing process.

- Warm Setting:
The process that is adding higher loads beyond the actual limits to the highly heated spring. This will modify its shape and keep it permanently fixed. We succeeded in securing the highest performance over a long period of time while preventing sagging.

The Set Includes:
- 16x Valve Springs
- 16x Spring Sheets

SPECIFICATIONS:
- Diameter(mm): 3.9
- Set Lenght(mm): 35.0
- Lift Lenght(mm): 25.0
- Supported Lift(mm): 10.00
- Set Load (kgf): 24.27%
- Lift Load (kgf): 80.67%
- Rev Limit (Ref.): 8500
- Material: SWOSC-VX
- Process: Nitride
- Color ID: Blue

COMPATIBILITY NOTES:
- Only vehicles from 10/93 to 11/97.
- Only vehicles with Inner Shim Design.
- Only for 3S-GE Engines.
- Only for MR-2 SW20 and Celica ST202.

Toyota Celica ST202 3S-GE (10/1993-11/1997)
Toyota MR-2 SW20 Type III 3S-GE (10/1993-06/1996)
Toyota MR-2 SW20 Type IV 3S-GE (06/1996-12/1997)

Product Reviews

-/5

Submit a review now and earn 20 Reward points once the review is approved.

Applies only to registered customers, may vary when logged in.

Learn more...

“ THE CUSTOMER'S VOICE ”

RHDJapan Store Reviews

I ordered the RS-Takagi side steps to replace the worn and deformed OEM side skirts on my 91 R32 GTR. The fitment was nearly perfect and only required minimal work to get them to look perfect. Once installed they are very solid which has led to the requirement that I must tell my passengers not to step on them, haha.

Yet another great product from kts and super fast delivery from rhd to the uk

Yet another great product from kts and super fast delivery from rhd to the uk

Yet another great product from hks and super fast delivery from rhd to the uk

Yet another great product from cusco and super fast delivery from rhd to the uk

Please wait

Please wait...

Your Session is not Valid.

Please Login

{{var product.name}}