TRD Suskit for Circuit Coilover Suspension Vitz

Brand: TRD
Product: Suskit for Circuit Coilover Suspension Vitz
Part Num: 48000-NP110

FEATURES:
- Fine-tune the adjustment:
This car-height adjustment type suspension kit enables you to set the chassis to match the driving conditions and vehicle characteristics. This is indispensable for sporty, controllable driving.

- A suspension kit with perfect balance:
Matching of the springs and shocks to the car extends to including all required parts in kit form, and the ability to easily fine-tune your adjustments.

- Car height and damper force can be adjusted freely:
By enabling the car height and damper force to be varied to match driving conditions and driver preferences, the vehicle's steering characteristics, center of gravity, cornering weight, and more can be adjusted easily, drawing out the maximum potential of a sports vehicle, especially for the circuit.
Although you can vary the preload through car height adjustment, you cannot adjust the preload alone.

- The spring rate can be adjusted:
You can change the rate of optional springs.

KIT Component Parts:
- 2x Front Shock Absorber (48510-NP150): Height Adjustable Type4-stage adjustable rate.
- 2x Rear Shock Absorber (48531-NP150): 4-stage adjustable rate.
- 2x Front Spring Upper Seat (48471-SP014): Aluminum.
- 2x Front Spring Lower Seat (48472-SP012-55): Aluminum M552.
- 2x Front Spring Lower Seat Retainer (40815-SP012-55): Aluminum M552.
- 2x Front Upper Support (48609-NP100): Extra firm type.
- 2x Rear Upper Support ASSY (48750-NP100): Extra firm type.
- 2x Rear Upper Support (48755-NP100): Extra firm type.
- 2x Front Bump Rubber (48341-12170): Toyota Genuine Part.
- 2x Dust Seal (90303-22049): Toyota Genuine Part.
- 2x Rear Suspension Arm Seat (48726-NP100): Material: Rubber (Toe-corerct system restriction).

Compatible Coil Springs (Sold separately):
Front:
- 48131-SP000-06 (Spring Rate: K=58.8N/mm)
- 48131-SP000-08 (Spring Rate: K=78.4N/mm)
- 48131-SP000-10 (Spring Rate: K=98.0N/mm)

Rear:
- 48231-NP110-10 (Spring Rate: K=98.0N/mm)
- 48231-NP110-12 (Spring Rate: K=117.6N/mm)

SPECIFICATIONS:
Shock Absorber:
- Structure:
-- Front: Assemble type
-- Rear: Assemble type
- Damping Adjustament:
-- Front: 4-stage
-- Rear: 4-stage
- Damping Force:
-- Front: 2832/794N
-- Rear: 1823/676N

PRODUCT NOTES:
- Value in the above list shows damping force at 0.3m/s of piston speed.(Showing 3rd position for 5-stage adjustable type and 2nd position for 4-stage adjustable type.)
- Do not use this product on public road in condition springs play when jacking-up and conditoin vehicle sit lower than 90mm from the ground.
- It's required to adjust ride height to secure at least 90mm from the ground to conform to the safety standard if high-respons muffler Ver. S is installed at the same time.
- Vehicle might not conform to the safety standard with recommended ride height on circuit driving.
- Product is packed in pieces, not assembled. Install this product as specified in the installation manual enclosed.
- To adjust vehicle height, adjust the position of the screw-type lower spring seat.

VEHICLE NOTES:
- Ride height adjustable for Front, non-adjustable for rear.
- For Netz Cup VITZ series(one-make race), approved on public road use.
- Caution: Coil springs are not included.

COMPATIBILITY NOTES:
- Only 2WD vehicles.