Works Bell Standard Boss Kit - 625

Brand: Works Bell
Product: Standard Boss Kit - 625
Part Num: 625

SPECIFICATIONS:
Material: Aluminum

PRODUCT NOTES:
- ALE50 ALWE50 ATE50 ATWE50 AVE50 FPY32 FGY32 FGNY32 FGDY32 Y33 JPY33 JMY33 JHY33 JHBY33: Functions/equipment cannot be used, which is operated only from the switches on steering wheel.
- ALE50 ALWE50 ATE50 ATWE50 AVE50 FHY33 FGY33 FGDY33 FGNY33 JY33 JPY33 JMY33 JHY33 JHBY33: Please make sure that the wirings from spiral cable are coming out at 3 o'clock direction; if at 3 o'clock direction, use 629.

COMPATIBILITY NOTES:
- ALE50 ALWE50 ATE50 ATWE50 AVE50: Only for Elgrand equipped with airbags 5/97~7/00
- FPY32 FGY32 FGNY32 FGDY32: Only for Cima equipped with airbags Not compatible with vehicles equipped with VDC 9/91~6/96
- FHY33 FGY33 FGDY33 FGNY33: Only for Cima equipped with airbags Not compatible with vehicles equipped with VDC 7/96~12/00
- JY33 JPY33 JMY33 JHY33 JHBY33: Only for Leopard equipped with airbags 3/96~6/99
INSTALLATION NOTE:
INSTALLATION NOTE:
These items are manufactured from either cast or billet aluminum process. Manufactured in conjunction with strict quality assurance practices of ASEA (Autosports & Special Equipment Association) under NAPAC (Nippon Auto Parts Aftermarket Committee). Manufactured to be extremely durable for sports/competition application and brake away under severe impact reducing potential harm to driver.
Incorrect installation may occur during installation especially on tapered tooth type design. If the item is not perfectly lined up or slippage occurs the excess stress my crack under torque load. Please make sure to remove all grease from steering shaft and set the boss kit to its most flush mounting position prior to applying torque.
For any possible claim during installation please follow the installation requirements with video proof.
- Maximum torque set between 3~3.5kg/m.
*Torque wrench operation needs to be done with two hands, one on the handle and one holding perfect center and straight positioning.
**Steering wheel / shaft should be held from turning when being torqued down to get proper readings.
***Torque wrenches for heavy duty operation such a lug nuts can be more difficult to get smaller accurate readings for low torque specification.