HKS Oil Cooler Kit S Type for Forced Induction Engines - BRZ ZC6 86 ZN6 Zenki
80889
JPY
HKS
SKU: 163693
PN: 15004-AT011This kit is a direct bolt on application designed to maintain cool engine oil/water temperatures. Along with increased engine oil volume Ideal size of highly efficient inner-fin design oil cooler core and strategic mounting location allow for optimum cooling properties. Depending on application the kits are available between standard and oil block relocation type layout for best clearance and accessibility. All oil blocks also come with sensor ports to properly and easily adapt most aftermarket oil pressure and temperature meters. Prolong the life of your oil and in turn your internal engine components, especially in harsh driving environments. Most blocks come with built in thermostat to regulate oil allowing engine to warm up quicker as well. Custom mounts and brackets made specifically for each application allow for a high quality durable and efficient setup. Get this and all your JDM at RHDJapan!!
Brand: HKS
Product: Oil Cooler Kit S Type for Forced Induction Engines - BRZ ZC6 86 ZN6 Zenki
Part Number: 15004-AT011
SPECIFICATIONS:
Type: Type S
Core Location: In Right Fender
Core Size (mm): 200X200X32
Num. of Rows: 15
Hose Size : #10
Air Guide: Included
PRODUCT NOTES:
- slight modification required to radiator support
- ideal layout for normally aspirated engines. vehicles going with supercharger or bolt-on turbo should select the alternative option.
Product: Oil Cooler Kit S Type for Forced Induction Engines - BRZ ZC6 86 ZN6 Zenki
Part Number: 15004-AT011
SPECIFICATIONS:
Type: Type S
Core Location: In Right Fender
Core Size (mm): 200X200X32
Num. of Rows: 15
Hose Size : #10
Air Guide: Included
PRODUCT NOTES:
- slight modification required to radiator support
- ideal layout for normally aspirated engines. vehicles going with supercharger or bolt-on turbo should select the alternative option.
Compatibility is from maker for JDM cars only. We don't guarantee fitment. Always do your own research before purchase. After-sale support does not include installation support.
Subaru BRZ ZC6 Applied A FA20 (04/2012-09/2013)
Subaru BRZ ZC6 Applied B FA20 (09/2013-06/2014)
Subaru BRZ ZC6 Applied C FA20 (07/2014-01/2015)
Subaru BRZ ZC6 Applied D FA20 (02/2015-05/2016)
Toyota 86 ZN6 FA20 (04/2012-08/2016)
Subaru BRZ ZC6 Applied A FA20 (04/2012-09/2013)
Subaru BRZ ZC6 Applied B FA20 (09/2013-06/2014)
Subaru BRZ ZC6 Applied C FA20 (07/2014-01/2015)
Subaru BRZ ZC6 Applied D FA20 (02/2015-05/2016)
Toyota 86 ZN6 FA20 (04/2012-08/2016)
Customers who bought this product also purchased
TRD Front Strut Tower Bar - BRZ ZC6 ZD8 86 ZN6 GR86 ZN8
List Price: ¥30,800
Sale Price: ¥27,319
You Save: ¥3,481
Product Reviews
Submit a review now and earn 20 Reward points once the review is approved.
Applies only to registered customers, may vary when logged in.
“ THE CUSTOMER'S VOICE ”
RHDJapan Store Reviews
Helps to lock down the rear differential Review by Jeremy
Much stiffer than standard Review by Jeremy
The standard pitch mount and even the enhanced STI pitch mount, still allow some movement, as they are compromised by their bushings which are designed to prevent excessive NVH. This Cusco item is heavily biased towards stopping movement, rather than preventing NVH, so as expected more noise and vibration can be detected (mainly on startup).
Perfect Rear Geometry Review by Jeremy
As standard the GRB Impreza only has a single adjustment for toe, so you basically have no control over the rear geometry. Adjustable lower and toe arms are common, but there are very few adjustable upper rear arms.
This upper arm is the usual Cusco quality, and of course fits perfectly. There are only two things that would make it better. Firstly there are no fixings for the ABS cables, so you have to use zip ties, and secondly the inner bushings are hardened rubber rather than the superior pillow ball.
This upper arm is the usual Cusco quality, and of course fits perfectly. There are only two things that would make it better. Firstly there are no fixings for the ABS cables, so you have to use zip ties, and secondly the inner bushings are hardened rubber rather than the superior pillow ball.
Perfect Review by Mathew
Easy to install, fits well and didn’t rattle
amazing Review by ENRIQUE
great price, amazing service from RHDJapan keeping me updated on my order status through the holiday, impressed with the packaging as well as the part, i can't wait to install the pan on my project build.
The Cusco diff mount being made out of sheet steel formed in to a box structure, combined with stiff bushings, holds the diff tight. For the ultimate lockdown combine this mount with the Rear Differential Mount Collars Part No. 692 928 A, which are installed in the rear subframe.