These brake pads have been designed for all around racing machines. Of course you can use this brake pad for street drive called semi-street and has perfect control and sufficient braking force at full brake in circuit race even when ABS works. All-round brake pad from street use, mountain climb, high way cruising, circuit race and endurance race. Originally the material of this brake pad was developed to be used for rear-engine vehicle Porsche only but further developed for the front engine vehicles aiming the high control performance and improved durability from street users to circuit race users. Get this and all your JDM at RHDJapan!!
Brand: Acre
Product: Brake Pads Type PC2600 Brembo 8 Pot - RP013
Part Number: RP013 PC2600
SPECIFICATIONS:
Series: PC2600
Application: for Racing
Pad Shape: RP013 (AP 4POT/CP9444)
Material: Carbon Metallic
Applicable Rotor Temperature (℃): 0~750
Friction Coefficient (μ): 0.45
Dimensions (mm):
- Width: 97.0
- Height: 77
- Thickness: 16
Made in Japan
PRODUCT NOTES:
This pad is available in two different thickness depending on application, please check prior to order.
-Sometimes it may generate the brake noise little bit but it will reduce the excessive wearing of brake pad even for street use.
Corresponding Part Numbers:
-This brake pad was proved at Okayama International circuit 2 hours endurance race with Skyline R32 GT-R without any problems. also at Twin Ring MOTEGI circuit course, this brake pad was used for Idlers 12 hours endurance race.
Corresponding Part Numbers:
- Endless: EIP116
- Project Mu: Z337
Product: Brake Pads Type PC2600 Brembo 8 Pot - RP013
Part Number: RP013 PC2600
SPECIFICATIONS:
Series: PC2600
Application: for Racing
Pad Shape: RP013 (AP 4POT/CP9444)
Material: Carbon Metallic
Applicable Rotor Temperature (℃): 0~750
Friction Coefficient (μ): 0.45
Dimensions (mm):
- Width: 97.0
- Height: 77
- Thickness: 16
Made in Japan
PRODUCT NOTES:
This pad is available in two different thickness depending on application, please check prior to order.
-Sometimes it may generate the brake noise little bit but it will reduce the excessive wearing of brake pad even for street use.
Corresponding Part Numbers:
-This brake pad was proved at Okayama International circuit 2 hours endurance race with Skyline R32 GT-R without any problems. also at Twin Ring MOTEGI circuit course, this brake pad was used for Idlers 12 hours endurance race.
Corresponding Part Numbers:
- Endless: EIP116
- Project Mu: Z337
Compatibility is from maker for JDM cars only. We don't guarantee fitment. Always do your own research before purchase. After-sale support does not include installation support.
Universal
Universal
Product Reviews
Submit a review now and earn 20 Reward points once the review is approved.
Applies only to registered customers, may vary when logged in.
“ THE CUSTOMER'S VOICE ”
RHDJapan Store Reviews
Adjustability, strength and ease of movement Review by Wesley
Cusco quality, allows for caster adjustment up front
Cusco quality Review by Wesley
Easy install, makes a good difference
Noticeable Difference, Fast Shipping Review by Wesley
Ordered this and a few other Cusco items for my ER34. Easy install, great quality
Fast Shipping, Tein great for upgraded Ride quality Review by Wesley
Great Tein Quality, Fast Shipping, Very well packaged
Perfect for GTX Turbos, where the internal wastgate is too small. Review by Philipp
The quality is typically HKS perfect.The price-performance ratio is very good and there is no other option on the market where you can increase the spring preload. It would be nice if HKS would bring another 40mm version onto the market with a smaller housing. Because it's not that easy to accommodate such a large wastgate in the engine compartment.
