This is a Tray Type Battery Relocation Kit for enthusiasts thinking about mounting their battery in the trunk. Relocating the battery to the trunk will allow you to achieve a better weight distribution and keeps the battery from being an obstruction for intercooler piping.
*Please specify the Tray Size and Battery Terminal Type (from the Product Specs tab above) you wish to purchase this product for at the point of sale.
Get this and all your JDM at RHDJapan!!
*Please specify the Tray Size and Battery Terminal Type (from the Product Specs tab above) you wish to purchase this product for at the point of sale.
Get this and all your JDM at RHDJapan!!
Brand: Border
Product: Tray Type Battery Relocation Kit
Part Number: 64127_2633527
SPECIFICATIONS
Tray Sizes
- Tray A: 240mm x 125mm (Compatible Battery Size: A19 ~ B24)
- Tray B: 270mm x 180mm (Compatible Battery Size: D26)
- Tray C: 240mm x 180mm (Compatible Battery Size: C24 ~ D23)
Terminal Sizes:
- Small (A19, B17, B19, B20, B24)
- Large (C24, D20, D23, D26)
NOTES
Tray Type A: Uses Small size terminals only
Tray Type C/B: Uses Large size terminals
Product: Tray Type Battery Relocation Kit
Part Number: 64127_2633527
SPECIFICATIONS
Tray Sizes
- Tray A: 240mm x 125mm (Compatible Battery Size: A19 ~ B24)
- Tray B: 270mm x 180mm (Compatible Battery Size: D26)
- Tray C: 240mm x 180mm (Compatible Battery Size: C24 ~ D23)
Terminal Sizes:
- Small (A19, B17, B19, B20, B24)
- Large (C24, D20, D23, D26)
NOTES
Tray Type A: Uses Small size terminals only
Tray Type C/B: Uses Large size terminals
Universal
Customers who bought this product also purchased
ARC Brazing Induction Box Air Filter Version II A Type - IDBE-A
List Price: ¥8,800
Sale Price: ¥8,379
You Save: ¥421
Product Reviews
Submit a review now and earn 20 Reward points once the review is approved.
Applies only to registered customers, may vary when logged in.
“ THE CUSTOMER'S VOICE ”
RHDJapan Store Reviews
Nice nismo Review by Ahmed
Like it
I like RHDJapan Review by Ahmed
Thanx
I like Review by Ahmed
Good for rb26
It's a necessary piece of rubber Review by kuuko
This item is required when using TRD bushes, as they are slightly shorter than OEM type. All I can really say is that they are hardened and made from the same rubber as the TRD bushes.
Replacing these bushes was long overdue Review by kuuko
These bushes are often ignored due to the cost and difficulty of replacement, but they shouldn't be. my oem bushes were completely worn and causing significant play and movement, so this upgrade transformed the feel of the rear end - so much so that i had to readjust coilover settings to compensate. In terms of value, it is excellent, as these TRD bushes are the same price if not cheaper than inferior aftermarket oem replacements. Note that the TRD bushes are slightly smaller than others, to accommodate the separate trd bush spacer (washer) that is also required to use these.
