This is a full stainless muffler which is a very high quality unit that gets you more power and gives off a great sound. The increased dimensions of the Fujitsubo exhaust are designed to give you great exhaust flow and an increase in torque and horse power. This also features a pre-muffler/resonator to help muffle engine tones, keeping sound at a reasonable level. Get this and all your JDM at RHDJapan!!
Brand: Fujitsubo
Product: Power Getter Exhaust - JZX100
Part Num: 100-24057
SPECIFICATIONS:
Series: Legalis Power Getter
Included:
- Power Getter Exhaust Muffler
- Gasket Packing and hardware
Tip Type: Straight (With Hole)
Tip Diameter: 114.0mm
Pipe Diameter: 76.3mm - 89.1mm
Manifold Weight:
- OEM: 21.6kg
- Fujitsubo: 16.1kg
Acceleration (30km/h to 160km/h)
- OEM: -
- Fujitsubo: 5.0sec.
Maximum output
- OEM: -
- Fujitsubo: 175.8kw (239.1ps)/5840rpm
Maximum Torque
- OEM: -
- Fujitsubo: 327.3N/m (33.4Kg/m) / 3690rpm
Supercharging pressure:
- OEM: -
- Fujitsubo: 0.61kgf/cm2
Noise Levels (dB):
OEM:
- Idling Sound: 60
- Noise Near exhaust (4650rpm): 84
- 3000rpm: 78
- 5000rpm: 86
- Response 4000rpm~6000rpm: 97
Fujitsubo:
- Idling Sound: 69
- Noise Near exhaust (4650rpm): 91
- 3000rpm: 84
- 5000rpm: 88
- Response 4000rpm~6000rpm: 104
PRODUCT NOTES:
- Performance and noise level specs are based on Chaser
COMPATIBILITY NOTES:
Common with before and after M/C
Common with cars with OEM rear under spoiler
Product: Power Getter Exhaust - JZX100
Part Num: 100-24057
SPECIFICATIONS:
Series: Legalis Power Getter
Included:
- Power Getter Exhaust Muffler
- Gasket Packing and hardware
Tip Type: Straight (With Hole)
Tip Diameter: 114.0mm
Pipe Diameter: 76.3mm - 89.1mm
Manifold Weight:
- OEM: 21.6kg
- Fujitsubo: 16.1kg
Acceleration (30km/h to 160km/h)
- OEM: -
- Fujitsubo: 5.0sec.
Maximum output
- OEM: -
- Fujitsubo: 175.8kw (239.1ps)/5840rpm
Maximum Torque
- OEM: -
- Fujitsubo: 327.3N/m (33.4Kg/m) / 3690rpm
Supercharging pressure:
- OEM: -
- Fujitsubo: 0.61kgf/cm2
Noise Levels (dB):
OEM:
- Idling Sound: 60
- Noise Near exhaust (4650rpm): 84
- 3000rpm: 78
- 5000rpm: 86
- Response 4000rpm~6000rpm: 97
Fujitsubo:
- Idling Sound: 69
- Noise Near exhaust (4650rpm): 91
- 3000rpm: 84
- 5000rpm: 88
- Response 4000rpm~6000rpm: 104
PRODUCT NOTES:
- Performance and noise level specs are based on Chaser
COMPATIBILITY NOTES:
Common with before and after M/C
Common with cars with OEM rear under spoiler
Compatibility is from maker for JDM cars only. We don't guarantee fitment. Always do your own research before purchase. After-sale support does not include installation support.
Toyota Mark II/Chaser/Cresta JZX100 1JZ-GTE (09/1996-07/1998)
Toyota Mark II/Chaser/Cresta JZX100 1JZ-GTE (08/1998-09/2000)
Toyota Mark II/Chaser/Cresta JZX100 1JZ-GTE (09/1996-07/1998)
Toyota Mark II/Chaser/Cresta JZX100 1JZ-GTE (08/1998-09/2000)
Product Reviews
Submit a review now and earn 20 Reward points once the review is approved.
Applies only to registered customers, may vary when logged in.
“ THE CUSTOMER'S VOICE ”
RHDJapan Store Reviews
100% Worth it Review by Muzz
Replaced my old OEM filter with TOM'S on my ISF and gained over 40+ grams/second from the MAF sensor readings. KCLV also improved by around 2-3 while gaining a crazy amount of induction noise. 11/10
Good Review by Ethan
Bought in combo with front strut brace. Buyer beware, you will have to cut the interior to install if you have a Gita. Can't speak for the sedans. Other than that, quality and shipping was fantastic.
Also comes with sticker pack, new hardware and installation guide.
Also comes with sticker pack, new hardware and installation guide.
Excellent Review by Ethan
I purchased the front and rear strut bars at the same time, both arrived together perfectly. The front strut bar was super easy to install and fits perfectly without modifications. Qulaity is phenominal as always with cusco. Looks amazing and definitely improves the car's front end stability and rigidity.
Also comes with new hardware, installation guide and sticker pack.
Also comes with new hardware, installation guide and sticker pack.
Very expensive and not strong built quality. Review by SAMIR
This rear car ladder is overpriced and poorly constructed. While it looks great from a distance and has an appealing design, the moment you attempt to install it, the flimsy build quality becomes obvious. It feels so unstable that I wouldn't trust climbing on it. I do not recommend this product at all."
Worn Review by Andrew
Yeah,it's been about a year, haven't done anything crazy with my hood. They are already leaking all the fluid out and not holding the hood. For the price you'd expect em to last. Not worth the money in my opinion.
Bummer cause they looked sick while they lasted.
Bummer cause they looked sick while they lasted.
