This series was developed to provide competition vehicles with the best combination of power increase and weight reduction. While still being JASMA certified this muffler provides a very audible sports exhaust note. Full stainless construction with top craftsmanship focused on maximum weight reduction with more compact canisters, thinner materials down light brackets and flanges. A high quality ultra light weight stainless steel constructed muffler as a great cost-effective alternative to much more expensive titanium competition mufflers. Get this and all your JDM at RHDJapan!!
Brand: Fujitsubo
Product: RM01A Exhaust Muffler - CT9A Evo VII~VIII
Part Num: 290-32051
Kit Includes:
- 1x Super RM01A Exhaust Muffler
- 1x Gasket packing
- 1x M8x25 Bolt, Nuts PW/SW Set
- 2x M12 Nuts
- 1x installing hardware
SPECIFICATIONS:
Tip Type: Straight (in hole)
Tip Diameter: 99.0mm
Pipe Diameter: 76.3mm
Manifold Weight:
- OEM: 16.3kg
- Fujitsubo: 11.2kg
Acceleration (50km/h to 150km/h)
- OEM: 7.0 Sec.
- Fujitsubo: 6.8 Sec.
Maximum output
- OEM: 216.8kw (249.9ps) / 6620rpm
- Fujitsubo: 223.6kw (304.1ps) / 6160rpm
Maximum Torque
- OEM: 399.8N/m (40.8Kg/m) / 4340rpm
- Fujitsubo: 402.8N/m (41.1Kg/m) / 4460rpm
Noise Levels (dB):
OEM:
- Idling Sound: 80
- Noise Near exhaust (4875rpm): 88
- 3000rpm: 83
- 5000rpm: 84
- Response 4000rpm~6000rpm: 91
Fujitsubo:
- Idling Sound: 83
- Noise Near exhaust (4875rpm): 93
- 3000rpm: 88
- 5000rpm: 88
- Response 4000rpm~6000rpm: 99
PRODUCT NOTES:
- The Above Specs Are Based on Lancer Evolution VII
Product: RM01A Exhaust Muffler - CT9A Evo VII~VIII
Part Num: 290-32051
Kit Includes:
- 1x Super RM01A Exhaust Muffler
- 1x Gasket packing
- 1x M8x25 Bolt, Nuts PW/SW Set
- 2x M12 Nuts
- 1x installing hardware
SPECIFICATIONS:
Tip Type: Straight (in hole)
Tip Diameter: 99.0mm
Pipe Diameter: 76.3mm
Manifold Weight:
- OEM: 16.3kg
- Fujitsubo: 11.2kg
Acceleration (50km/h to 150km/h)
- OEM: 7.0 Sec.
- Fujitsubo: 6.8 Sec.
Maximum output
- OEM: 216.8kw (249.9ps) / 6620rpm
- Fujitsubo: 223.6kw (304.1ps) / 6160rpm
Maximum Torque
- OEM: 399.8N/m (40.8Kg/m) / 4340rpm
- Fujitsubo: 402.8N/m (41.1Kg/m) / 4460rpm
Noise Levels (dB):
OEM:
- Idling Sound: 80
- Noise Near exhaust (4875rpm): 88
- 3000rpm: 83
- 5000rpm: 84
- Response 4000rpm~6000rpm: 91
Fujitsubo:
- Idling Sound: 83
- Noise Near exhaust (4875rpm): 93
- 3000rpm: 88
- 5000rpm: 88
- Response 4000rpm~6000rpm: 99
PRODUCT NOTES:
- The Above Specs Are Based on Lancer Evolution VII
Compatibility is from maker for JDM cars only. We don't guarantee fitment. Always do your own research before purchase. After-sale support does not include installation support.
Mitsubishi Lancer Evolution VII CT9A 4G63 (02/2001-12/2002)
Mitsubishi Lancer Evolution VIII CT9A 4G63 (01/2003-02/2005)
Mitsubishi Lancer Evolution VII CT9A 4G63 (02/2001-12/2002)
Mitsubishi Lancer Evolution VIII CT9A 4G63 (01/2003-02/2005)
Product Reviews
Submit a review now and earn 20 Reward points once the review is approved.
Applies only to registered customers, may vary when logged in.
“ THE CUSTOMER'S VOICE ”
RHDJapan Store Reviews
Good Review by Ethan
Excellent Review by Ethan
I purchased the front and rear strut bars at the same time, both arrived together perfectly. The front strut bar was super easy to install and fits perfectly without modifications. Qulaity is phenominal as always with cusco. Looks amazing and definitely improves the car's front end stability and rigidity.
Also comes with new hardware, installation guide and sticker pack.
Also comes with new hardware, installation guide and sticker pack.
Very expensive and not strong built quality. Review by SAMIR
This rear car ladder is overpriced and poorly constructed. While it looks great from a distance and has an appealing design, the moment you attempt to install it, the flimsy build quality becomes obvious. It feels so unstable that I wouldn't trust climbing on it. I do not recommend this product at all."
Worn Review by Andrew
Yeah,it's been about a year, haven't done anything crazy with my hood. They are already leaking all the fluid out and not holding the hood. For the price you'd expect em to last. Not worth the money in my opinion.
Bummer cause they looked sick while they lasted.
Bummer cause they looked sick while they lasted.
Greatly improves rigidity. Review by Ivan
I bought this for my JZS171 and it fits perfectly, no issues with bolts not lining up, very good quality for its price. Excellent piece for anybody who wants to improve the handling of their car.
Also comes with sticker pack, new hardware and installation guide.