SARD Fuel Pump Pre-Price Increase Campaign ~5/29
UP

GRID ATTESA Digital IMU Sensor Unit - BCNR33 - RHDJapan

GRID ATTESA Digital IMU Sensor Unit - BCNR33

49939 JPY
GRID SKU: 168264 PN: DIMUR33
Images used may be generic. Actual product may vary.
 

List Price: ¥51,537

Sale Price: ¥49,939

You Save: ¥1,598


The Digital G-sensor senses digitally, the signal and the processing is all digital, and the time for signal transmission to the ECU is overwhelmingly short, which equals a fast response time, resulting in the ability to send only the needed amount of power to the front wheels. So, one is able to always drive with ideal power distribution.

The OEM G-sensor is located behind the shifter, and senses Gs by how much the internal pendulum swings, sending a signal to the ECU, upon which the ATTESA power distribution is controlled. Unfortunately as this is analog, the response time is slow, the G sensing range is narrow, and further as the springs deteriorate they continue to swing, resulting in a signal that hunts back and forth, which shows in the car's behavior. If such behavior appears in mid corner, the accelerator cannot really be applied, resulting in a time loss. Get this and all your JDM at RHDJapan!!
Brand: GRID
Product: ATTESA Digital IMU Sensor Unit - BCNR33
Part Num. : DIMUR33
Nissan Skyline GT-R BCNR33 RB26DETT (01/1995-01/1996)
Nissan Skyline GT-R BCNR33 RB26DETT (01/1996-02/1997)
Nissan Skyline GT-R BCNR33 RB26DETT (02/1997-05/1998)

Product Reviews

-/5

Submit a review now and earn 20 Reward points once the review is approved.

Applies only to registered customers, may vary when logged in.

Learn more...

“ THE CUSTOMER'S VOICE ”

RHDJapan Store Reviews

Received the item about a week earlier than the estimated date and the item is beautiful, can't wait to use it!

Probably the best BOV on the market for the BNR32. Rather than just being something you have to figure out where to place, this is a complete replacement for the pipe between the intercooler piping and the throttle chamber. It takes some more work, but requires no modifying, and is completely bolt-on. Definitely a must-have, for the sound alone.

Quality product

I've been using this boost controller for a while now. Easy to setup and mount. Interface is easy to use, but does require a lot of trial and error. It's a good buy based on other ebc's in the market. I've had a hallman boost controller where you can set it once and forget about it, but I needed adjustable pressure settings. This fills all the requirements I need.

awesome parts for a awesome price

Please wait

Please wait...

Your Session is not Valid.

Please Login

{{var product.name}}