This item is for any of the Steering wheels that we have listed on our website. Be sure to note that some boss kits will eliminate the need for your airbag and turn the airbag light off as well when installed IF specifically noted in the specifications notes. When in doubt please contact first. Get this and all your JDM at RHDJapan!
Brand: HKB Sports
Product: Boss Kit Hub Adapter - GS130 GS131
Part Num: OT-140
PRODUCT NOTES:
- For vehicles originally equipped with telescopic steering, please turn off the telescopic function switch and stop vertical motion to avoid horn malfunctioning.
- For vehicles originally equipped with airbag, the airbag monitor lamp will not be illuminated when Toyota SRS harness (sold separately) is installed. Also passenger seat airbag will operate for vehicles equipped with dual airbags.
INSTALLATION NOTE:
COMPATIBILITY NOTES:
- Only for vehicles equipped with Multi-TV or traction control (6-pole coupler)
- Compatible with vehicles originally equipped with airbag and with auto drive.
- GS130 GS131: Only for vehicles 8/89~
INSTALLATION NOTE:
These items are manufactured from either cast or billet aluminum process. Manufactured in conjunction with strict quality assurance practices of ASEA (Autosports & Special Equipment Association) under NAPAC (Nippon Auto Parts Aftermarket Committee). Manufactured to be extremely durable for sports/competition application and brake away under severe impact reducing potential harm to driver.
Incorrect installation may occur during installation especially on tapered tooth type design. If the item is not perfectly lined up or slippage occurs the excess stress my crack under torque load. Please make sure to remove all grease from steering shaft and set the boss kit to its most flush mounting position prior to applying torque.
For any possible claim during installation please follow the installation requirements with video proof.
- Maximum torque set between 3~3.5kg/m.
*Torque wrench operation needs to be done with two hands, one on the handle and one holding perfect center and straight positioning.
**Steering wheel / shaft should be held from turning when being torqued down to get proper readings.
***Torque wrenches for heavy duty operation such a lug nuts can be more difficult to get smaller accurate readings for low torque specification.
Product: Boss Kit Hub Adapter - GS130 GS131
Part Num: OT-140
PRODUCT NOTES:
- For vehicles originally equipped with telescopic steering, please turn off the telescopic function switch and stop vertical motion to avoid horn malfunctioning.
- For vehicles originally equipped with airbag, the airbag monitor lamp will not be illuminated when Toyota SRS harness (sold separately) is installed. Also passenger seat airbag will operate for vehicles equipped with dual airbags.
INSTALLATION NOTE:
COMPATIBILITY NOTES:
- Only for vehicles equipped with Multi-TV or traction control (6-pole coupler)
- Compatible with vehicles originally equipped with airbag and with auto drive.
- GS130 GS131: Only for vehicles 8/89~
INSTALLATION NOTE:
These items are manufactured from either cast or billet aluminum process. Manufactured in conjunction with strict quality assurance practices of ASEA (Autosports & Special Equipment Association) under NAPAC (Nippon Auto Parts Aftermarket Committee). Manufactured to be extremely durable for sports/competition application and brake away under severe impact reducing potential harm to driver.
Incorrect installation may occur during installation especially on tapered tooth type design. If the item is not perfectly lined up or slippage occurs the excess stress my crack under torque load. Please make sure to remove all grease from steering shaft and set the boss kit to its most flush mounting position prior to applying torque.
For any possible claim during installation please follow the installation requirements with video proof.
- Maximum torque set between 3~3.5kg/m.
*Torque wrench operation needs to be done with two hands, one on the handle and one holding perfect center and straight positioning.
**Steering wheel / shaft should be held from turning when being torqued down to get proper readings.
***Torque wrenches for heavy duty operation such a lug nuts can be more difficult to get smaller accurate readings for low torque specification.
Compatibility is from maker for JDM cars only. We don't guarantee fitment. Always do your own research before purchase. After-sale support does not include installation support.
Toyota Crown GS130 1G-FE (08/1993-12/1995)
Toyota Crown GS131 1G-FE (08/1993-12/1995)
Toyota Crown GS131 1G-GZE (08/1993-12/1995)
Toyota Crown GS130 1G-FE (08/1993-12/1995)
Toyota Crown GS131 1G-FE (08/1993-12/1995)
Toyota Crown GS131 1G-GZE (08/1993-12/1995)
Customers who bought this product also purchased
Product Reviews
Submit a review now and earn 20 Reward points once the review is approved.
Applies only to registered customers, may vary when logged in.
“ THE CUSTOMER'S VOICE ”
RHDJapan Store Reviews
Adjustability, strength and ease of movement Review by Wesley
Cusco quality, allows for caster adjustment up front
Cusco quality Review by Wesley
Easy install, makes a good difference
Noticeable Difference, Fast Shipping Review by Wesley
Ordered this and a few other Cusco items for my ER34. Easy install, great quality
Fast Shipping, Tein great for upgraded Ride quality Review by Wesley
Great Tein Quality, Fast Shipping, Very well packaged
Perfect for GTX Turbos, where the internal wastgate is too small. Review by Philipp
The quality is typically HKS perfect.The price-performance ratio is very good and there is no other option on the market where you can increase the spring preload. It would be nice if HKS would bring another 40mm version onto the market with a smaller housing. Because it's not that easy to accommodate such a large wastgate in the engine compartment.
