HKB Sports Boss Kit Hub Adapter - ON-228

Brand: HKB Sports
Product : Boss Kit Hub Adapter - ON-228
Part Number: ON-228

INSTALLATION NOTE:
PRODUCT NOTES:
- S15 WHC34 WGC34 WGNC34 HR34 ER34 ENR34 BNR34 A33 PA33 V10 HV10 JU30 JNU30 JHU30 JVU30 JVNU30 JTU30 U30 NU30 HU30 VU30 VNU30 TU30 TNU30: For vehicles equipped with cruise control, cruise control function will not work after installation.

COMPATIBILITY NOTES:
- S15: Only for Silvia equipped with airbags 1/99~8/02
- WHC34 WGC34 WGNC34: Only for Stagea equipped with airbags Not compatible with vehicles equipped with Dualmatic 8/98~
- HR34 ER34 ENR34 BNR34: Only for Skyline equipped with airbags Not compatible with vehicles equipped with Dualmatic 5/98~6/01
- A33 PA33: Only for Cefiro equipped with airbags 12/98~
- V10 HV10: Only for Tino equipped with airbags 10/98~
- JU30 JNU30 JHU30 JVU30 JVNU30 JTU30 U30 NU30 HU30 VU30 VNU30 TU30 TNU30: Only for Presage/Bassara 11/99~6/03
- SC35 GC35 GCC35 GNC35 HC35: Only for Laurel equipped with airbags Not compatible with vehicles equipped with Dualmatic Not compatible with vehicles equipped with traction control (VDC) 5/96~

INSTALLATION NOTE:
These items are manufactured from either cast or billet aluminum process. Manufactured in conjunction with strict quality assurance practices of ASEA (Autosports & Special Equipment Association) under NAPAC (Nippon Auto Parts Aftermarket Committee). Manufactured to be extremely durable for sports/competition application and brake away under severe impact reducing potential harm to driver.
Incorrect installation may occur during installation especially on tapered tooth type design. If the item is not perfectly lined up or slippage occurs the excess stress my crack under torque load. Please make sure to remove all grease from steering shaft and set the boss kit to its most flush mounting position prior to applying torque.
For any possible claim during installation please follow the installation requirements with video proof.
- Maximum torque set between 3~3.5kg/m.
*Torque wrench operation needs to be done with two hands, one on the handle and one holding perfect center and straight positioning.
**Steering wheel / shaft should be held from turning when being torqued down to get proper readings.
***Torque wrenches for heavy duty operation such a lug nuts can be more difficult to get smaller accurate readings for low torque specification.