HKS Coilover Suspension Full Kit Hipermax S - AYH30W GGH35W AGH35W
212309
JPY
HKS
SKU: 270213
PN: 80300-AT211This set of suspension is designed to replace the factory suspension related shock absorber / dampers and springs.
Building upon the 3 decades of suspension development and 9 years since the last version of Hipermax IV GT release this series has unified the many different street based Hipermax merits and further improved this new flagship series for the ultimate combination of driving performance and comfort performance, Driving Comfort. With exception of the circuit specific HIpermax IV SP series all other series will be replaced with this all-mighty spec. Specifically developed to provide the ultimate in harmony between performance handling and control with supreme ride comfort yet capable of high level performance on circuit as well. With massive adjustability in ride height and damper settings these items are an excellent choice for the daily driver to look and perform best under any kind of circumstance. Get this and all your JDM at RHDJapan!!
Building upon the 3 decades of suspension development and 9 years since the last version of Hipermax IV GT release this series has unified the many different street based Hipermax merits and further improved this new flagship series for the ultimate combination of driving performance and comfort performance, Driving Comfort. With exception of the circuit specific HIpermax IV SP series all other series will be replaced with this all-mighty spec. Specifically developed to provide the ultimate in harmony between performance handling and control with supreme ride comfort yet capable of high level performance on circuit as well. With massive adjustability in ride height and damper settings these items are an excellent choice for the daily driver to look and perform best under any kind of circumstance. Get this and all your JDM at RHDJapan!!
Brand: HKS
Product: Coilover Suspension Full Kit Hipermax S - AYH30W GGH35W AGH35W
Part Num: 880300-AT211
SPECIFICATIONS:
AYH30W
Series: Hipermax S
Spring Rate N/mm (kgf/mm):
- Front: 69( 7 )
- Rear: 89( 9 )
Free Height (mm):
- Front: 250 (Barrel)
- Rear: Special
Recommended Range to change Spring Rate N/mm (kgf/mm):
- Front: ±10 ( 1 )
- Rear: N/A
Damper Force (Rebound/Damping):
- Front: 650/325
- Rear: 600/400
- Note: Damping force is at piston speed 0.1m/sec.
Default position of Dial:
- Front: 15
- Rear: 15
Damping Force Adjustment:
- Front: 30 Steps
- Rear: 30 Steps
Height Adjustable Lower Bracket:
- Front: Yes
- Rear: Yes
Upper Mount:
- Front: Rubber Bush
- Rear: Rubber Bush
Damper Layout:
- Front: Inverted
- Rear: Normal
Damper/Spring Layout:
- Front: Coilover
- Rear: Separate
Damping force adjustable with Wire:
- Front: N/A
- Rear: N/A
Helper Spring (Spring Rate N/mm):
- Front: N/A
- Rear: N/A
Ride Height Specification -
-Maximum Adjustable Range High - Low (mm):
-- Front: -20 ~ -89
-- Rear:- 20 ~ -79
-Drivable Range High - Low (mm):
-- Front: -20 ~ -62
-- Rear: -20 ~ -79
COMPATIBILITY NOTES:
- AYH30W GGH35W AGH35W: Not compatible with vehicles equipped with side lift up seats.
- AYH30W: Compatible with Alphard/Vellfire 01/2018~ only.
- GGH35W AGH35W: Compatible with 4WD Alphard/Vellfire only.
Product: Coilover Suspension Full Kit Hipermax S - AYH30W GGH35W AGH35W
Part Num: 880300-AT211
SPECIFICATIONS:
AYH30W
Series: Hipermax S
Spring Rate N/mm (kgf/mm):
- Front: 69( 7 )
- Rear: 89( 9 )
Free Height (mm):
- Front: 250 (Barrel)
- Rear: Special
Recommended Range to change Spring Rate N/mm (kgf/mm):
- Front: ±10 ( 1 )
- Rear: N/A
Damper Force (Rebound/Damping):
- Front: 650/325
- Rear: 600/400
- Note: Damping force is at piston speed 0.1m/sec.
Default position of Dial:
- Front: 15
- Rear: 15
Damping Force Adjustment:
- Front: 30 Steps
- Rear: 30 Steps
Height Adjustable Lower Bracket:
- Front: Yes
- Rear: Yes
Upper Mount:
- Front: Rubber Bush
- Rear: Rubber Bush
Damper Layout:
- Front: Inverted
- Rear: Normal
Damper/Spring Layout:
- Front: Coilover
- Rear: Separate
Damping force adjustable with Wire:
- Front: N/A
- Rear: N/A
Helper Spring (Spring Rate N/mm):
- Front: N/A
- Rear: N/A
Ride Height Specification -
-Maximum Adjustable Range High - Low (mm):
-- Front: -20 ~ -89
-- Rear:- 20 ~ -79
-Drivable Range High - Low (mm):
-- Front: -20 ~ -62
-- Rear: -20 ~ -79
COMPATIBILITY NOTES:
- AYH30W GGH35W AGH35W: Not compatible with vehicles equipped with side lift up seats.
- AYH30W: Compatible with Alphard/Vellfire 01/2018~ only.
- GGH35W AGH35W: Compatible with 4WD Alphard/Vellfire only.
Compatibility is from maker for JDM cars only. We don't guarantee fitment. Always do your own research before purchase. After-sale support does not include installation support.
Toyota Alphard AGH35W 2AR-FE (01/2015-12/2017)
Toyota Alphard AGH35W 2AR-FE (01/2018-11/2019)
Toyota Alphard AYH30W 2AR-FXE (01/2018-11/2019)
Toyota Alphard GGH35W 2GR-FE (01/2015-12/2017)
Toyota Alphard GGH35W 2GR-FE (01/2018-11/2019)
Toyota Vellfire AYH30W 2AR-FXE (01/2018-11/2019)
Toyota Alphard AGH35W 2AR-FE (01/2015-12/2017)
Toyota Alphard AGH35W 2AR-FE (01/2018-11/2019)
Toyota Alphard AYH30W 2AR-FXE (01/2018-11/2019)
Toyota Alphard GGH35W 2GR-FE (01/2015-12/2017)
Toyota Alphard GGH35W 2GR-FE (01/2018-11/2019)
Toyota Vellfire AYH30W 2AR-FXE (01/2018-11/2019)
Product Reviews
Submit a review now and earn 20 Reward points once the review is approved.
Applies only to registered customers, may vary when logged in.
“ THE CUSTOMER'S VOICE ”
RHDJapan Store Reviews
Adjustability, strength and ease of movement Review by Wesley
Cusco quality, allows for caster adjustment up front
Cusco quality Review by Wesley
Easy install, makes a good difference
Noticeable Difference, Fast Shipping Review by Wesley
Ordered this and a few other Cusco items for my ER34. Easy install, great quality
Fast Shipping, Tein great for upgraded Ride quality Review by Wesley
Great Tein Quality, Fast Shipping, Very well packaged
Perfect for GTX Turbos, where the internal wastgate is too small. Review by Philipp
The quality is typically HKS perfect.The price-performance ratio is very good and there is no other option on the market where you can increase the spring preload. It would be nice if HKS would bring another 40mm version onto the market with a smaller housing. Because it's not that easy to accommodate such a large wastgate in the engine compartment.
