The HKS V Cam System Version Up - Overhaul Kit is recommended by HKS to be use when upgrading you V Cam System Step 1 Type A or Type B to the most performance V Cam System Step 2. This overhaul kit is perfect to fully restore your V Cam System. The HKS V Cam System - Step 2 is the perfect medium for someone wanting to gain higher end to perform better at the circuit but does not want to sacrifice the bottom end for driving around town. Using variable valve timing technology, V Cam System evolves the engine to a new level. HKS V Cam System addresses the issue of low-mid rpm torque whilst allowing the engine to continue producing power at high RPM.
Upon purchasing please state the car from the compatibility list that you would like to have the HKS V Cam System Overhaul Kit for.
Get this and all your JDM at RHDJapan!!
Upon purchasing please state the car from the compatibility list that you would like to have the HKS V Cam System Overhaul Kit for.
Get this and all your JDM at RHDJapan!!
Brand: HKS
Product: V Cam System Version Up - Overhaul Kit
Part Num: 22999-AK001
Kit Includes:
- 4x O-Rings for Joint Pipe (Num. 4 in Picture)
- 1x O-Ring for Connector (Num. 5 in Picture)
- 1x O-Ring for Oil Control Valve (Num. 6 in Picture)
- 1x O-Ring for Angle Sensor (Num. 7 in Picture)
- 3x Cover Plate Bolts for VVT Unit (Num. 8 in Picture)
SPECIFICATIONS:
O-Ring for Joint Pipe Size (mm):
- Diameter: 1.5
- Bore: 5.5
O-Ring for Connector Size (mm):
- Diameter: 1.9
- Bore: 13.0
O-Ring for Oil Control Valve (mm):
- Diameter: 1.9
- Bore: 16.8
O-Ring for Cam Angle Sensor Size (mm):
- Diameter: 2.4
- Bore: 13.8
Cover Plate Bolts for VVT Unit Size: M5x10
PRODUCT NOTES:
- Version UP Requirements -
From Step 1 Type A to Step 2:
- Special Intake Camshaft Step 2 is required
- Unit Assy 50 is Required
- HKS Forged Piston Kit is required
- HKS recommend to replace: O/H KIT (this listing) + Cam Cover Gasket
From Step 1 Type A to Step 1:
- Unit Assy 50 is Required
- HKS recommend to replace: Cam Cover Gasket
From Step 1 Type B to Step 2:
- Special Intake Camshaft Step 2 is required
- HKS Forged Piston Kit is required
- HKS recommend to replace: O/H KIT (this listing) + Cam Cover Gasket
- Note: Replace the Unit Assy 50 if the pulley unit was used for 5 years or 50, 000 km or depending on the driving conditions (frequent circuit use, etc.).
Product: V Cam System Version Up - Overhaul Kit
Part Num: 22999-AK001
Kit Includes:
- 4x O-Rings for Joint Pipe (Num. 4 in Picture)
- 1x O-Ring for Connector (Num. 5 in Picture)
- 1x O-Ring for Oil Control Valve (Num. 6 in Picture)
- 1x O-Ring for Angle Sensor (Num. 7 in Picture)
- 3x Cover Plate Bolts for VVT Unit (Num. 8 in Picture)
SPECIFICATIONS:
O-Ring for Joint Pipe Size (mm):
- Diameter: 1.5
- Bore: 5.5
O-Ring for Connector Size (mm):
- Diameter: 1.9
- Bore: 13.0
O-Ring for Oil Control Valve (mm):
- Diameter: 1.9
- Bore: 16.8
O-Ring for Cam Angle Sensor Size (mm):
- Diameter: 2.4
- Bore: 13.8
Cover Plate Bolts for VVT Unit Size: M5x10
PRODUCT NOTES:
- Version UP Requirements -
From Step 1 Type A to Step 2:
- Special Intake Camshaft Step 2 is required
- Unit Assy 50 is Required
- HKS Forged Piston Kit is required
- HKS recommend to replace: O/H KIT (this listing) + Cam Cover Gasket
From Step 1 Type A to Step 1:
- Unit Assy 50 is Required
- HKS recommend to replace: Cam Cover Gasket
From Step 1 Type B to Step 2:
- Special Intake Camshaft Step 2 is required
- HKS Forged Piston Kit is required
- HKS recommend to replace: O/H KIT (this listing) + Cam Cover Gasket
- Note: Replace the Unit Assy 50 if the pulley unit was used for 5 years or 50, 000 km or depending on the driving conditions (frequent circuit use, etc.).
Compatibility is from maker for JDM cars only. We don't guarantee fitment. Always do your own research before purchase. After-sale support does not include installation support.
Mitsubishi Lancer Evolution IV CN9A 4G63 (08/1996-12/1997)
Mitsubishi Lancer Evolution V CP9A 4G63 (01/1998-12/1998)
Mitsubishi Lancer Evolution VI CP9A 4G63 (01/1999-11/1999)
Mitsubishi Lancer Evolution VII CT9A 4G63 (02/2001-12/2002)
Mitsubishi Lancer Evolution VIII CT9A 4G63 (01/2003-02/2005)
Nissan Skyline GT-R BCNR33 RB26DETT (01/1995-01/1996)
Nissan Skyline GT-R BCNR33 RB26DETT (01/1996-02/1997)
Nissan Skyline GT-R BCNR33 RB26DETT (02/1997-05/1998)
Nissan Skyline GT-R BNR32 RB26DETT (08/1989-08/1991)
Nissan Skyline GT-R BNR32 RB26DETT (08/1991-02/1993)
Nissan Skyline GT-R BNR32 RB26DETT (02/1993-12/1994)
Nissan Skyline GT-R BNR34 RB26DETT (01/1999-08/2000)
Nissan Skyline GT-R BNR34 RB26DETT (08/2000-10/2000)
Nissan Skyline GT-R BNR34 RB26DETT (10/2000-08/2002)
Mitsubishi Lancer Evolution IV CN9A 4G63 (08/1996-12/1997)
Mitsubishi Lancer Evolution V CP9A 4G63 (01/1998-12/1998)
Mitsubishi Lancer Evolution VI CP9A 4G63 (01/1999-11/1999)
Mitsubishi Lancer Evolution VII CT9A 4G63 (02/2001-12/2002)
Mitsubishi Lancer Evolution VIII CT9A 4G63 (01/2003-02/2005)
Nissan Skyline GT-R BCNR33 RB26DETT (01/1995-01/1996)
Nissan Skyline GT-R BCNR33 RB26DETT (01/1996-02/1997)
Nissan Skyline GT-R BCNR33 RB26DETT (02/1997-05/1998)
Nissan Skyline GT-R BNR32 RB26DETT (08/1989-08/1991)
Nissan Skyline GT-R BNR32 RB26DETT (08/1991-02/1993)
Nissan Skyline GT-R BNR32 RB26DETT (02/1993-12/1994)
Nissan Skyline GT-R BNR34 RB26DETT (01/1999-08/2000)
Nissan Skyline GT-R BNR34 RB26DETT (08/2000-10/2000)
Nissan Skyline GT-R BNR34 RB26DETT (10/2000-08/2002)
Customers who bought this product also purchased
HKS Camshaft Step 1 SS-Cam EX 256 - BNR32 BCNR33
List Price: ¥48,400
Sale Price: ¥44,149
You Save: ¥4,251
HKS V Cam System Step 1 with VALCON - BNR32 BCNR33 BNR34
List Price: ¥382,800
Sale Price: ¥346,059
You Save: ¥36,741
HPI R35 Airflow Type Aluminum Adapter & Harness Set Black - RB26DETT
List Price: ¥24,200
Sale Price: ¥19,319
You Save: ¥4,881
Product Reviews
“ THE CUSTOMER'S VOICE ”
RHDJapan Store Reviews
Looks amazing Review by Stephen
A really great looking and high quality product. It's a little expensive especially with the import taxes but it was worth it.
Excellent Review by Zizi
Fast shipping and item were well packed.
Good Pad for Golf 7.5 Gti Tcr Review by Marius
I drive this Pad on Nürburgring Nordschleife and Touge Runs. Very good bite and not too much heat in the Brakesystem.
Worth it Review by Christian
Perfect fit and great quality
Amazing Review by Christian
Bought an extra one for the future, as i plan to run the shift knob for a while!