These are designed specifically for high horsepower output vehicles. SCR-PRO rotors are constructed as a two-piece rotor design. SCR-PRO rotors are developed from super tough FC Cast Iron Material and are heat-treated for reliability, durability and thermal stability under aggressive driving. The affixed bell housing is made from a billet aluminum alloy for strength as well as reduction of unsprung weight. Project Mu SCR-PRO rotors are available as front and rear replacements including vehicles with the factory Brembo calipers. They are manufactured from the factory featuring a slotted and dimpled surface to facilitate better pad wear and maximize cooling and braking performance. SCR-PRO rotors also feature a specially designed internal vane to improve heat dissipation from the rotors. Get this and all your JDM at RHDJapan!
Brand: Project Mu
Product: SCR-PRO Front Rotors - EP3
Part Num: GPRH131
SPECIFICATIONS:
Included: Left and Right
Application: Front Brakes
Structure: 2 Pieces
Slits: Straight/Eight slits per side; sixteen on both sides
Materials:
- disc: High-alloy high-carbon FC cast iron
- Bell Housing: Aluminum alloy
Dimensions (mm):
- O-D: 300
- Thickness: 25
- P.C.D.: 114.3
- Holes: 5
- Height: +1.9
- C.Bore: 64.2
PRODUCT NOTES:
- Project Mu Bell Housing are 1.9mm wider compare to Stock OEM. When mounted the wheels will have a 1.9mm offset.
Product: SCR-PRO Front Rotors - EP3
Part Num: GPRH131
SPECIFICATIONS:
Included: Left and Right
Application: Front Brakes
Structure: 2 Pieces
Slits: Straight/Eight slits per side; sixteen on both sides
Materials:
- disc: High-alloy high-carbon FC cast iron
- Bell Housing: Aluminum alloy
Dimensions (mm):
- O-D: 300
- Thickness: 25
- P.C.D.: 114.3
- Holes: 5
- Height: +1.9
- C.Bore: 64.2
PRODUCT NOTES:
- Project Mu Bell Housing are 1.9mm wider compare to Stock OEM. When mounted the wheels will have a 1.9mm offset.
Compatibility is from maker for JDM cars only. We don't guarantee fitment. Always do your own research before purchase. After-sale support does not include installation support.
Honda Civic Type-R EP3 K20A (12/2001-09/2003)
Honda Civic Type-R EP3 K20A (09/2003-09/2005)
Honda Civic Type-R EP3 K20A (12/2001-09/2003)
Honda Civic Type-R EP3 K20A (09/2003-09/2005)
Customers who bought this product also purchased
Dixcel Brake Rotor Set FP Type Front Standard Finish - S2000 AP1 AP2
List Price: ¥31,900
Sale Price: ¥23,639
You Save: ¥8,261
Dixcel Brake Rotor Set FP Type Rear Standard Finish - S2000 AP1 AP2
List Price: ¥25,300
Sale Price: ¥23,079
You Save: ¥2,221
Product Reviews
Submit a review now and earn 20 Reward points once the review is approved.
Applies only to registered customers, may vary when logged in.
“ THE CUSTOMER'S VOICE ”
RHDJapan Store Reviews
100% Worth it Review by Muzz
Replaced my old OEM filter with TOM'S on my ISF and gained over 40+ grams/second from the MAF sensor readings. KCLV also improved by around 2-3 while gaining a crazy amount of induction noise. 11/10
Good Review by Ethan
Bought in combo with front strut brace. Buyer beware, you will have to cut the interior to install if you have a Gita. Can't speak for the sedans. Other than that, quality and shipping was fantastic.
Also comes with sticker pack, new hardware and installation guide.
Also comes with sticker pack, new hardware and installation guide.
Excellent Review by Ethan
I purchased the front and rear strut bars at the same time, both arrived together perfectly. The front strut bar was super easy to install and fits perfectly without modifications. Qulaity is phenominal as always with cusco. Looks amazing and definitely improves the car's front end stability and rigidity.
Also comes with new hardware, installation guide and sticker pack.
Also comes with new hardware, installation guide and sticker pack.
Very expensive and not strong built quality. Review by SAMIR
This rear car ladder is overpriced and poorly constructed. While it looks great from a distance and has an appealing design, the moment you attempt to install it, the flimsy build quality becomes obvious. It feels so unstable that I wouldn't trust climbing on it. I do not recommend this product at all."
Worn Review by Andrew
Yeah,it's been about a year, haven't done anything crazy with my hood. They are already leaking all the fluid out and not holding the hood. For the price you'd expect em to last. Not worth the money in my opinion.
Bummer cause they looked sick while they lasted.
Bummer cause they looked sick while they lasted.
