Toda Racing Capacity Up 2200 Kit NA I Type 87.5mm - AP1
470359
JPY
TODA RACING
SKU: 51869
PN: 13001-F20-002-IThis product will grant to your vehicle more torque with improved acceleration and superior response even with light throttle use. The complete kit contents all parts made from the highest quality, precision and strength. The best performance upgrade at an affordable price. The engine amazing performance potential is extracted with the use of this Capacity Up Kit.
Get this and all your JDM at RHDJapan!!
Get this and all your JDM at RHDJapan!!
Brand: Toda Racing
Product: Capacity Up 2200 Kit NA I Type 87.5mm - AP1
Part Num: 13001-F20-002-I
SPECIFICATIONS:
Kit contents:
- 1x Toda forged piston KIT
- 1x Special crankshaft (Long stroke, High accuracy dynamic balanced)
- 4x I section chrome molly connecting-rods (Fully floating with Bush & balanced)
Spec:
- Bore Stroke: 87.5090.7mm
- Displacement: 2182cc
- Crown Volume (*1): 4.35cc/10.4cc
- Projection Height: +1.0mm (from the deck of the block)
- Reference C/R (*2): OEM head GK t=0.6mm12.25:1
PRODUCT NOTES:
- *1: Crown volume is measured from the piston shoulder/from the deck of the block.
- *2: The compression ratio given above are only to be taken as a guide, measurements are required.
- Strengthened chrome molly I section connecting-rods are included.
COMPATIBILITY NOTES:
- For NA Vehicles.
FEATURES:
Defric coating (Lubricous film) is applied to the piston skirt, for a reduction in friction and loads as well as improved durability.
Product: Capacity Up 2200 Kit NA I Type 87.5mm - AP1
Part Num: 13001-F20-002-I
SPECIFICATIONS:
Kit contents:
- 1x Toda forged piston KIT
- 1x Special crankshaft (Long stroke, High accuracy dynamic balanced)
- 4x I section chrome molly connecting-rods (Fully floating with Bush & balanced)
Spec:
- Bore Stroke: 87.5090.7mm
- Displacement: 2182cc
- Crown Volume (*1): 4.35cc/10.4cc
- Projection Height: +1.0mm (from the deck of the block)
- Reference C/R (*2): OEM head GK t=0.6mm12.25:1
PRODUCT NOTES:
- *1: Crown volume is measured from the piston shoulder/from the deck of the block.
- *2: The compression ratio given above are only to be taken as a guide, measurements are required.
- Strengthened chrome molly I section connecting-rods are included.
COMPATIBILITY NOTES:
- For NA Vehicles.
FEATURES:
Defric coating (Lubricous film) is applied to the piston skirt, for a reduction in friction and loads as well as improved durability.
Compatibility is from maker for JDM cars only. We don't guarantee fitment. Always do your own research before purchase. After-sale support does not include installation support.
Honda S2000 AP1 F20C (04/1999-09/2003)
Honda S2000 AP1 F20C (09/2003-11/2005)
Honda S2000 AP1 F20C (04/1999-09/2003)
Honda S2000 AP1 F20C (09/2003-11/2005)
Product Reviews
Submit a review now and earn 20 Reward points once the review is approved.
Applies only to registered customers, may vary when logged in.
“ THE CUSTOMER'S VOICE ”
RHDJapan Store Reviews
Adjustability, strength and ease of movement Review by Wesley
Cusco quality, allows for caster adjustment up front
Cusco quality Review by Wesley
Easy install, makes a good difference
Noticeable Difference, Fast Shipping Review by Wesley
Ordered this and a few other Cusco items for my ER34. Easy install, great quality
Fast Shipping, Tein great for upgraded Ride quality Review by Wesley
Great Tein Quality, Fast Shipping, Very well packaged
Perfect for GTX Turbos, where the internal wastgate is too small. Review by Philipp
The quality is typically HKS perfect.The price-performance ratio is very good and there is no other option on the market where you can increase the spring preload. It would be nice if HKS would bring another 40mm version onto the market with a smaller housing. Because it's not that easy to accommodate such a large wastgate in the engine compartment.
