Works Bell Standard Boss Kit - 532

Brand: Works Bell
Product: Standard Boss Kit - 532
Part Num: 532

SPECIFICATIONS:
Material: Aluminum

PRODUCT NOTES:
- Please check the terminal type for horn wiring; for coupler terminal=#532. See fig. 5-1.
- #532 and #528 can be used for the same compatible vehicles. See fig. 5-9.

COMPATIBILITY NOTES:
- JZS147: Only for Aristo equipped with coupler terminal for horn wiring Not compatible with vehicles equipped with airbags Not compatible with vehicles equipped with cruise control 10/91~7/97
- VCV10 VCV11 MCV20 MCV21: Only for Windom equipped with coupler terminal for horn wiring Not compatible with vehicles equipped with airbags Not compatible with vehicles equipped with cruise control 10/91~7/01
- ST206 ST207: Only for Curren equipped with coupler terminal for horn wiring 2/94~9/95
- JZA80: Only for Supra equipped with coupler terminal for horn wiring Not compatible with vehicles equipped with airbags Not compatible with vehicles equipped with cruise control 5/93~7/02
- VCV15: Only for Spector Coupe equipped with coupler terminal for horn wiring Not compatible with vehicles equipped with airbags Not compatible with vehicles equipped with cruise control 9/92~12/96
- JZZ30 JZZ31 UZZ30 UZZ31 UZZ32: Only for Soarer equipped with coupler terminal for horn wiring Not compatible with vehicles equipped with airbags Not compatible with vehicles equipped with cruise control 5/91~3/01
- RZH100G RZH101G KZH106G RZH110G RZH111G RZH102V RZH183K RZH182K RZH122V RZH112V RZH112K KZH120G KZH116G KZH126G LH129V LH123V KZH100G KZH106W KZH110G RZH101G: Only for Hiace/Regius Ace equipped with coupler terminal for horn wiring Not compatible with vehicles equipped with cruise control 10/93~7/96
- YX76V LX76V: Only for Mark II Van equipped with coupler terminal for horn wiring 8/89~8/96
- HZJ74K HZJ76K HZJ71 HZJ71V HZJ74V HZJ76V HZJ70 HZJ70V HZJ77V HZJ77HV HZJ73HV PZJ70 PZJ70V PZJ77V: Only for Land Cruiser equipped with coupler terminal for horn wiring 1/90~7/04
- FJ80G FZJ80G HDJ81V HZJ81V: Only for Land Cruiser equipped with coupler terminal for cruise control by column switch 1/90~12/97
- KZJ78W KZJ78G KZJ71W KZJ71G LJ71G LJ78G LJ78W: Only for Land Cruiser Prado equipped with coupler terminal for horn wiring 8/87~4/96
INSTALLATION NOTE:
INSTALLATION NOTE:
These items are manufactured from either cast or billet aluminum process. Manufactured in conjunction with strict quality assurance practices of ASEA (Autosports & Special Equipment Association) under NAPAC (Nippon Auto Parts Aftermarket Committee). Manufactured to be extremely durable for sports/competition application and brake away under severe impact reducing potential harm to driver.
Incorrect installation may occur during installation especially on tapered tooth type design. If the item is not perfectly lined up or slippage occurs the excess stress my crack under torque load. Please make sure to remove all grease from steering shaft and set the boss kit to its most flush mounting position prior to applying torque.
For any possible claim during installation please follow the installation requirements with video proof.
- Maximum torque set between 3~3.5kg/m.
*Torque wrench operation needs to be done with two hands, one on the handle and one holding perfect center and straight positioning.
**Steering wheel / shaft should be held from turning when being torqued down to get proper readings.
***Torque wrenches for heavy duty operation such a lug nuts can be more difficult to get smaller accurate readings for low torque specification.