This Boss Kit/Hub adapter allows for adaptation of aftermarket steering wheel. Whether on or off the circuit the steering wheel is one of the first modifications to improve driving enjoyment and feel. Manufactured by boss kit specialist with superior materials and processing for extreme durability and reliability for any driving application.
Get this and all your JDM at RHDJapan!!
Get this and all your JDM at RHDJapan!!
Brand: Works Bell
Product: Standard Boss Kit - 542
Part Number: 542
PRODUCT NOTES:
- Functions on steering wheel except the horn cannot be used anymore.
- GRS210 AWS210 ARS210 GRS211 AWS211 GWS214 GRS214 AWS215: Short Boss 542S is not applicable, due to interference with spiral cable.
COMPATIBILITY NOTES:
- AVV50: Only for Camry equipped with airbags 9/11~
- GRS210 AWS210 ARS210 GRS211 AWS211 GWS214 GRS214 AWS215: Only for Crown equipped with airbags 1/13~8/17
- NGX10 NGX50 ZYX10 ZYX11: Only for C-HR equipped with airbags Compatibility not confirmed for vehicles made before M/C 10/19~
- GUN125: Only for Hilux equipped with airbags 9/17~
- ZN6: Only for 86 equipped with airbags 8/16~
- TRJ150 GDJ150W TRJ150W: Only for Land Cruiser Prado equipped with airbags 12/17~
- ZC6: Only for BRZ equipped with airbags 8/16~
INSTALLATION NOTE:
INSTALLATION NOTE:
These items are manufactured from either cast or billet aluminum process. Manufactured in conjunction with strict quality assurance practices of ASEA (Autosports & Special Equipment Association) under NAPAC (Nippon Auto Parts Aftermarket Committee). Manufactured to be extremely durable for sports/competition application and brake away under severe impact reducing potential harm to driver.
Incorrect installation may occur during installation especially on tapered tooth type design. If the item is not perfectly lined up or slippage occurs the excess stress my crack under torque load. Please make sure to remove all grease from steering shaft and set the boss kit to its most flush mounting position prior to applying torque.
For any possible claim during installation please follow the installation requirements with video proof.
- Maximum torque set between 3~3.5kg/m.
*Torque wrench operation needs to be done with two hands, one on the handle and one holding perfect center and straight positioning.
**Steering wheel / shaft should be held from turning when being torqued down to get proper readings.
***Torque wrenches for heavy duty operation such a lug nuts can be more difficult to get smaller accurate readings for low torque specification.
Product: Standard Boss Kit - 542
Part Number: 542
PRODUCT NOTES:
- Functions on steering wheel except the horn cannot be used anymore.
- GRS210 AWS210 ARS210 GRS211 AWS211 GWS214 GRS214 AWS215: Short Boss 542S is not applicable, due to interference with spiral cable.
COMPATIBILITY NOTES:
- AVV50: Only for Camry equipped with airbags 9/11~
- GRS210 AWS210 ARS210 GRS211 AWS211 GWS214 GRS214 AWS215: Only for Crown equipped with airbags 1/13~8/17
- NGX10 NGX50 ZYX10 ZYX11: Only for C-HR equipped with airbags Compatibility not confirmed for vehicles made before M/C 10/19~
- GUN125: Only for Hilux equipped with airbags 9/17~
- ZN6: Only for 86 equipped with airbags 8/16~
- TRJ150 GDJ150W TRJ150W: Only for Land Cruiser Prado equipped with airbags 12/17~
- ZC6: Only for BRZ equipped with airbags 8/16~
INSTALLATION NOTE:
INSTALLATION NOTE:
These items are manufactured from either cast or billet aluminum process. Manufactured in conjunction with strict quality assurance practices of ASEA (Autosports & Special Equipment Association) under NAPAC (Nippon Auto Parts Aftermarket Committee). Manufactured to be extremely durable for sports/competition application and brake away under severe impact reducing potential harm to driver.
Incorrect installation may occur during installation especially on tapered tooth type design. If the item is not perfectly lined up or slippage occurs the excess stress my crack under torque load. Please make sure to remove all grease from steering shaft and set the boss kit to its most flush mounting position prior to applying torque.
For any possible claim during installation please follow the installation requirements with video proof.
- Maximum torque set between 3~3.5kg/m.
*Torque wrench operation needs to be done with two hands, one on the handle and one holding perfect center and straight positioning.
**Steering wheel / shaft should be held from turning when being torqued down to get proper readings.
***Torque wrenches for heavy duty operation such a lug nuts can be more difficult to get smaller accurate readings for low torque specification.
Compatibility is from maker for JDM cars only. We don't guarantee fitment. Always do your own research before purchase. After-sale support does not include installation support.
Subaru BRZ ZC6 Applied E FA20 (06/2016-09/2017)
Subaru BRZ ZC6 Applied F FA20 (10/2017-03/2021)
Toyota 86 ZN6 FA20 (04/2012-08/2016)
Toyota 86 ZN6 FA20 (08/2016-03/2019)
Toyota 86 ZN6 FA20 (04/2019-10/2021)
Toyota C-HR NGX10 8NR-FTS (10/2019-08/2020)
Toyota C-HR NGX50 8NR-FTS (12/2016-09/2019)
Toyota C-HR ZYX10 2ZR-FXE (12/2016-09/2019)
Toyota C-HR ZYX11 2ZR-FXE (12/2016-10/2019)
Toyota C-HR ZYX11 2ZR-FXE (10/2019~)
Toyota C-HR GR Sport ZYX11 2ZR-FXE (10/2019~)
Toyota Camry AVV50 2AR-FXE (09/2011-07/2017)
Toyota Crown AWS211 2AR-FSE (11/2014-06/2018)
Toyota Crown GRS214 2GR-FSE (08/2013-10/2015)
Toyota Crown Athlete ARS210 8AR-FTS (12/2012-09/2015)
Toyota Crown Athlete ARS210 8AR-FTS (10/2015-06/2018)
Toyota Crown Athlete AWS210 2AR-FSE (12/2013-06/2018)
Toyota Crown Athlete GRS210 4GR-FSE (12/2012-10/2015)
Toyota Crown Athlete GRS211 4GR-FSE (12/2012-06/2018)
Toyota Crown Majesta AWS215 2AR-FSE (07/2014~)
Toyota Crown Majesta GWS214 2GR-FXE (09/2013-10/2015)
Toyota Crown Majesta GWS214 2GR-FXE (10/2015~)
Toyota Crown Royal GRS210 4GR-FSE (12/2012~)
Subaru BRZ ZC6 Applied E FA20 (06/2016-09/2017)
Subaru BRZ ZC6 Applied F FA20 (10/2017-03/2021)
Toyota 86 ZN6 FA20 (04/2012-08/2016)
Toyota 86 ZN6 FA20 (08/2016-03/2019)
Toyota 86 ZN6 FA20 (04/2019-10/2021)
Toyota C-HR NGX10 8NR-FTS (10/2019-08/2020)
Toyota C-HR NGX50 8NR-FTS (12/2016-09/2019)
Toyota C-HR ZYX10 2ZR-FXE (12/2016-09/2019)
Toyota C-HR ZYX11 2ZR-FXE (12/2016-10/2019)
Toyota C-HR ZYX11 2ZR-FXE (10/2019~)
Toyota C-HR GR Sport ZYX11 2ZR-FXE (10/2019~)
Toyota Camry AVV50 2AR-FXE (09/2011-07/2017)
Toyota Crown AWS211 2AR-FSE (11/2014-06/2018)
Toyota Crown GRS214 2GR-FSE (08/2013-10/2015)
Toyota Crown Athlete ARS210 8AR-FTS (12/2012-09/2015)
Toyota Crown Athlete ARS210 8AR-FTS (10/2015-06/2018)
Toyota Crown Athlete AWS210 2AR-FSE (12/2013-06/2018)
Toyota Crown Athlete GRS210 4GR-FSE (12/2012-10/2015)
Toyota Crown Athlete GRS211 4GR-FSE (12/2012-06/2018)
Toyota Crown Majesta AWS215 2AR-FSE (07/2014~)
Toyota Crown Majesta GWS214 2GR-FXE (09/2013-10/2015)
Toyota Crown Majesta GWS214 2GR-FXE (10/2015~)
Toyota Crown Royal GRS210 4GR-FSE (12/2012~)
Customers who bought this product also purchased
CUSCO Strut Tower Bar Type ALC OS Aluminum Carbon Oval Shaft Rear - S2000 AP1 AP2
List Price: ¥22,000
Sale Price: ¥16,309
You Save: ¥5,691
Okuyama Carbing Front Aluminum Strut Tower Bar Type I - AP1
List Price: ¥47,190
Sale Price: ¥40,349
You Save: ¥6,841
NARDI Classic Steering Wheel Smooth Leather Black Spoke - 340mm
List Price: ¥57,200
Sale Price: ¥45,649
You Save: ¥11,551
Okuyama Carbing Aluminum Radiator Cooling Plate - S2000 AP1 AP2
List Price: ¥31,350
Sale Price: ¥26,809
You Save: ¥4,541
Product Reviews
“ THE CUSTOMER'S VOICE ”
RHDJapan Store Reviews
Looks amazing Review by Stephen
A really great looking and high quality product. It's a little expensive especially with the import taxes but it was worth it.
Excellent Review by Zizi
Fast shipping and item were well packed.
Good Pad for Golf 7.5 Gti Tcr Review by Marius
I drive this Pad on Nürburgring Nordschleife and Touge Runs. Very good bite and not too much heat in the Brakesystem.
Worth it Review by Christian
Perfect fit and great quality
Amazing Review by Christian
Bought an extra one for the future, as i plan to run the shift knob for a while!