Works Bell Standard Boss Kit - 601

Brand: Works Bell
Product: Standard Boss Kit - 601
Part Num: 601

SPECIFICATIONS:
Material: Aluminum

PRODUCT NOTES:
- FJR30 KFJR30 DR30 HR30 KDR30 KHR30 RHR30 C120: Boss spacer(10mm or more) is needed, which is sold separately. Telescopic function cannot be used.
- Y30: Telescopic function cannot be used. If the diameter of serration in the steering shaft is smaller, please use #602. Diameter17.6mm=#601 Diameter15.3mm=#602 See fig. 6-5.
- LBYD21 VBYD21 WHYD21 WBYD21: Telescopic function cannot be used.

COMPATIBILITY NOTES:
- A10 A11: Only for Stanza/Auster 1/77~5/86
- B310: Only for Sunny 11/77~9/81
- S110 US110: Only for Silvia 1/79~1/83
- PC10 KPC10 GC10 KGC10: Only for Skyline 1/70~12/75
- PC210 KPC210 HGC210 KHGC210: Only for Skyline Not compatible with vehicles equipped with ASCD 1/79~8/81
- FJR30 KFJR30 DR30 HR30 KDR30 KHR30 RHR30: Only for Skyline 1/82~12/84
- Y30: Only for Cedric/Gloria 6/83~5/87
- Y30: Only for Cedric/Gloria Wagon 1/83~10/86
- Y30: Only for Cedric/Gloria Wagon equipped with telescopic function 11/86~2/94
- LBYD21 VBYD21 WHYD21 WBYD21: Only for Terrano equipped with telescopic function 11/86~9/95
- C120: Only for Vanette equipped with telescopic function 11/78~5/93
- S130 GS130 KHS130 HGS130: Only for Fairlady Z 8/78~8/83
- P510 H510 G610 G810 Y910 P910: Only for Bluebird 1/68~83
- HC32 HJC32 FJC32 GC32 SC32 RC32: Only for Laurel 10/84~12/88
INSTALLATION NOTE:
INSTALLATION NOTE:
These items are manufactured from either cast or billet aluminum process. Manufactured in conjunction with strict quality assurance practices of ASEA (Autosports & Special Equipment Association) under NAPAC (Nippon Auto Parts Aftermarket Committee). Manufactured to be extremely durable for sports/competition application and brake away under severe impact reducing potential harm to driver.
Incorrect installation may occur during installation especially on tapered tooth type design. If the item is not perfectly lined up or slippage occurs the excess stress my crack under torque load. Please make sure to remove all grease from steering shaft and set the boss kit to its most flush mounting position prior to applying torque.
For any possible claim during installation please follow the installation requirements with video proof.
- Maximum torque set between 3~3.5kg/m.
*Torque wrench operation needs to be done with two hands, one on the handle and one holding perfect center and straight positioning.
**Steering wheel / shaft should be held from turning when being torqued down to get proper readings.
***Torque wrenches for heavy duty operation such a lug nuts can be more difficult to get smaller accurate readings for low torque specification.