Works Bell Standard Boss Kit - 602

Brand: Works Bell
Product: Standard Boss Kit
Part Num: 602

SPECIFICATIONS:
Material: Aluminum

COMPATIBILITY NOTES:
- W10, K30, C23: Not compatible with vehicles with OEM steering wheel having two return holes in the back.
- PT12: For vehicles manufactured after 06/86.
- E24: For vehicles manufactured before 01/95.
- K30, HK30: For vehicles manufactured between 07/93 and 01/95.
- B13: Not compatible with ASCD and with vehicles equipped with electronically controlled suspensions.
- Y60: Not compatible with SRS equipped vehicles.
- S13: Not compatible with Super Hicas equipped vehicles.
- R32: Not compatible with ASCD, Super Hicas and SRS equipped vehicles.
- Y31: Not compatible with ASCD and non-rotative center pads equipped vehicles.
- Y30: For vehicles manufactured after 11/86.
- Y30: Not compatible with telescopic equipped vehicles.
- Y30: Not compatible with vehicles with a steering shaft selection diameter of 17.6mm.
- A31; Not compatible with ASCD and Duet SS equipped vehicles.
- D21: Not compatible with ASCD and telescopic equipped vehicles.
- C23: Not compatible with vehicles manufactured after 05/93.
- C23: Not compatible with Super Hicas equipped vehicles.
- Z31: Not compatible with ASCD equipped vehicles.
- Z32: Not compatible with ASCD and Super Hicas equipped vehicles.
- U11: Not compatible with Duet SS equipped vehicles.
- U12: Not compatible with vehicles manufactured before 01/88.
- U12: Not compatible with ASCD and Duet SS equipped vehicles.
- R10: Not compatible with ASCD and with vehicles equipped with electronically controlled suspensions.
- J30: Not compatible with ASCD and Duet SS equipped vehicles.
- C33: Not compatible with ASCD, Duet SS and Remote Controller equipped vehicles.
INSTALLATION NOTE:
INSTALLATION NOTE:
These items are manufactured from either cast or billet aluminum process. Manufactured in conjunction with strict quality assurance practices of ASEA (Autosports & Special Equipment Association) under NAPAC (Nippon Auto Parts Aftermarket Committee). Manufactured to be extremely durable for sports/competition application and brake away under severe impact reducing potential harm to driver.
Incorrect installation may occur during installation especially on tapered tooth type design. If the item is not perfectly lined up or slippage occurs the excess stress my crack under torque load. Please make sure to remove all grease from steering shaft and set the boss kit to its most flush mounting position prior to applying torque.
For any possible claim during installation please follow the installation requirements with video proof.
- Maximum torque set between 3~3.5kg/m.
*Torque wrench operation needs to be done with two hands, one on the handle and one holding perfect center and straight positioning.
**Steering wheel / shaft should be held from turning when being torqued down to get proper readings.
***Torque wrenches for heavy duty operation such a lug nuts can be more difficult to get smaller accurate readings for low torque specification.