Works Bell Standard Boss Kit - CD3 CD4 CD5 CD6 CD7 CD8 CE1 CJ1

Brand: Works Bell
Product: Standard Boss Kit - CD3 CD4 CD5 CD6 CD7 CD8 CE1 CJ1
Part Num: 213

SPECIFICATIONS:
Material: Aluminum

PRODUCT NOTES:
- 213 and 201 can be used for the same compatible vehicles. Total height of 213 is 85mm; 201 64mm.

COMPATIBILITY NOTES:
- CD3 CD4 CD5 CD6 CD7 CD8: Only for Accord Not compatible with vehicles equipped with automatic cruise control Not compatible with vehicles equipped with airbags 9/93~7/95
- CE1: Only for Accord Wagon Not compatible with vehicles equipped with automatic cruise control Not compatible with vehicles equipped with airbags 6/94~8/95
- CJ1: For vehicles to 08/95.
INSTALLATION NOTE:
INSTALLATION NOTE:
These items are manufactured from either cast or billet aluminum process. Manufactured in conjunction with strict quality assurance practices of ASEA (Autosports & Special Equipment Association) under NAPAC (Nippon Auto Parts Aftermarket Committee). Manufactured to be extremely durable for sports/competition application and brake away under severe impact reducing potential harm to driver.
Incorrect installation may occur during installation especially on tapered tooth type design. If the item is not perfectly lined up or slippage occurs the excess stress my crack under torque load. Please make sure to remove all grease from steering shaft and set the boss kit to its most flush mounting position prior to applying torque.
For any possible claim during installation please follow the installation requirements with video proof.
- Maximum torque set between 3~3.5kg/m.
*Torque wrench operation needs to be done with two hands, one on the handle and one holding perfect center and straight positioning.
**Steering wheel / shaft should be held from turning when being torqued down to get proper readings.
***Torque wrenches for heavy duty operation such a lug nuts can be more difficult to get smaller accurate readings for low torque specification.