HKB Sports Boss Kit Hub Adapter - OT-236

Brand: HKB Sports
Product: Boss Kit Hub Adapter - OT-236
Part Num. : OT-236

PRODUCT NOTES:
- ZNM10G ZNM10W ANM10G ANM15G ANM10W ANM15W: Audio/side camera switches and so on will not work.
INSTALLATION NOTE:

COMPATIBILITY NOTES:
- ZNM10G ZNM10W ANM10G ANM15G ANM10W ANM15W: Only for Isis 9/04~4/07
- ZZT240 ZZT245 NZT240: Only for Allion equipped with airbags 12/04~6/07
- KGC10 KGC15 QNC10: Only for Passo equipped with airbags 6/04~
- JZX115 JZX110 GX110 GX115: Only for Mark II equipped with airbags 10/00~
- JZX115W JZX110W GX115W GX110W: Only for Mark II Blit equipped with airbags 1/02~
- S320: Only for Hijet/Atrai equipped with airbags 12/04~9/07

INSTALLATION NOTE:
These items are manufactured from either cast or billet aluminum process. Manufactured in conjunction with strict quality assurance practices of ASEA (Autosports & Special Equipment Association) under NAPAC (Nippon Auto Parts Aftermarket Committee). Manufactured to be extremely durable for sports/competition application and brake away under severe impact reducing potential harm to driver.
Incorrect installation may occur during installation especially on tapered tooth type design. If the item is not perfectly lined up or slippage occurs the excess stress my crack under torque load. Please make sure to remove all grease from steering shaft and set the boss kit to its most flush mounting position prior to applying torque.
For any possible claim during installation please follow the installation requirements with video proof.
- Maximum torque set between 3~3.5kg/m.
*Torque wrench operation needs to be done with two hands, one on the handle and one holding perfect center and straight positioning.
**Steering wheel / shaft should be held from turning when being torqued down to get proper readings.
***Torque wrenches for heavy duty operation such a lug nuts can be more difficult to get smaller accurate readings for low torque specification.