RECARO Base Frame Seat Rail Standard Type Right - Civic EU1 EU3 EP3
24829
JPY
RECARO
SKU: 260864
PN: 2085.529.2This item is designed as a direct bolt on application to the body frame providing a solid mounting base that is compatible with a variety of different sports and race seats. One piece construction provides an extremely durable base while also providing a slightly lowered ride height ideal for sports applications. In addition the rails are designed to provide extensive back and forth slide adjustability with fine lock notches on both sides. Drive position can be further fine tuned with the use of optional offset stays or spacers. Can be used as is or with a diverse variety of different seats when used in conjunction with the compatible adapters. Get this and all your JDM at RHDJapan!!
Brand: Recaro
Product: Base Frame Seat Rail Standard Type Right - Civic EU1 EU3 EP3
Part Num: 2085.529.2
SPECIFICATIONS:
Type: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).
PRODUCT NOTES:
- Seat position:5mm lower than OEM seat.(Middle position of 3 position baseframe with ST-JJ)15mm to console from OEM seat.The length of slider is 70mm shorter than OEM seat on front side.The length of slider is 50mm longer than OEM seat on rear side.
- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.(Except for Ferio)For non-side airbag car only.,2WD.
SR-3,4,5,Sport-J,JJ,JC,D,DCfor back rest side and Doorarm rest a couple mm. interfere.SR-1,2for back rest side and Doorarm rest a couple mm. interfere,shoulder area andB-Pillara couple mm. interfere.SP-#,Racer shoulder area andB-Pillara couple mm. interfere.Trend-J,JJ,JC,D,DCfor back rest side and DoorArm Rest approximately5〜10mm interfere.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0/5/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0/5/10mm). Interference can be reduced by adjustment.
COMPATIBILITY NOTES:
Fits the following seats:
- LX / LX-# / LX-VS / LX-VF / ERGOMED / ERGOMED C/ ERGOMED D/ ERGOMED E / ERGOMED LD / ERGOMED MV (Based on IS-84 structure)
- LX-F (Based on IS-05 structure)
- LS / LS-# / LT-#
- CS / CR / CG / COMFOMED
- CSE
- D / DH / DV
- DS / DSH / DSV / ES-V / DSE
- RMS2600A / 2700G: A separate side adapter must be provided.
- New Orthopead (with RECARO Vent)
- RCS: A separate side adapter must be provided.
- SR-2 late model / SR-3 / SR-4 / SR-5
- Rally Special / First Generation SR / SR-2 early model
- Late model A-8
- Early model A-8
- SP-G / SP-A: A separate side adapter must be provided.
- SP-GN / SP-AN: A separate side adapter must be provided.
- RACER SP-G/A: A separate side adapter must be provided.
- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC
- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC
- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC
- AM19 TREND-JS
- AM19 STYLE-JS
- AM19 SPORT-JS
- AM19 TREND-D AM19 TREND-DC
- AM19 STYLE-D AM19 STYLE-DC
- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV
- TS-# / RS-#: A separate side adapter must be provided.
- SP-X
- SR-6 / SR-7 / SR-7F / SR-11
- Sportster / Cross Sportster
- Armrest: 2 & 3
Recaro Seats (when used in conjunction with adapter-SL):
- SR
- SR2
- SR3
- SR4
- SR5
- L# Series
med Series (manually adjustable)
Recaro Seats (when used in conjunction with adapter-SJ):
- Style
- Sport
- Trend
- AM19 (manually adjustable)
Sparco Seats (when used in conjunction with adapter-S0-2):
- Monza
- Sportivo
- Speed
- Sprint
- Star
- Torino II
Cobra
- SFX
- Cub
- Roadstar
- Clubman
- Sprint
- Club Sports
- Daytona
- Sidewinder
- Imola 2
D&W Seats (when used in conjunction with adapter-SL)
Sabelt Seats (when used in conjunction with adapter-S0-2):
- Tiger
- Fox
- Crono
Blitz/Konig Seats (when used in conjunction with adapter-KB):
- GT2
- GT3
Corbeau Seats
Stout Seats
Product: Base Frame Seat Rail Standard Type Right - Civic EU1 EU3 EP3
Part Num: 2085.529.2
SPECIFICATIONS:
Type: New-type frame. Can be adjusted in three height settings (in some car makes, the legs of the slide rail must be cut, depending on the installation position).
PRODUCT NOTES:
- Seat position:5mm lower than OEM seat.(Middle position of 3 position baseframe with ST-JJ)15mm to console from OEM seat.The length of slider is 70mm shorter than OEM seat on front side.The length of slider is 50mm longer than OEM seat on rear side.
- Cautionary note: After install RECARO seat, side airbag is not available.Only the seats which are mentioned in the list are allowed to install. This baseframe is designed for Japanese market car.(Except for Ferio)For non-side airbag car only.,2WD.
SR-3,4,5,Sport-J,JJ,JC,D,DCfor back rest side and Doorarm rest a couple mm. interfere.SR-1,2for back rest side and Doorarm rest a couple mm. interfere,shoulder area andB-Pillara couple mm. interfere.SP-#,Racer shoulder area andB-Pillara couple mm. interfere.Trend-J,JJ,JC,D,DCfor back rest side and DoorArm Rest approximately5〜10mm interfere.RMS:RMS can be adjusted seat position by RMS side adapter.(Height:front and rear, Offset: 0/5/10mm). Interference can be reduced by adjustment.RCS:RCS can be adjusted seat position by RCS side adapter.(Height:front and rear, Offset: 0/5/10mm). Interference can be reduced by adjustment.
COMPATIBILITY NOTES:
Fits the following seats:
- LX / LX-# / LX-VS / LX-VF / ERGOMED / ERGOMED C/ ERGOMED D/ ERGOMED E / ERGOMED LD / ERGOMED MV (Based on IS-84 structure)
- LX-F (Based on IS-05 structure)
- LS / LS-# / LT-#
- CS / CR / CG / COMFOMED
- CSE
- D / DH / DV
- DS / DSH / DSV / ES-V / DSE
- RMS2600A / 2700G: A separate side adapter must be provided.
- New Orthopead (with RECARO Vent)
- RCS: A separate side adapter must be provided.
- SR-2 late model / SR-3 / SR-4 / SR-5
- Rally Special / First Generation SR / SR-2 early model
- Late model A-8
- Early model A-8
- SP-G / SP-A: A separate side adapter must be provided.
- SP-GN / SP-AN: A separate side adapter must be provided.
- RACER SP-G/A: A separate side adapter must be provided.
- AM19 TREND-J AM19 TREND-JJ AM19 TREND-JC
- AM19 STYLE-J AM19 STYLE-JJ AM19 STYLE-JC
- AM19 SPORT-J AM19 SPORT-JJ AM19 SPORT-JC
- AM19 TREND-JS
- AM19 STYLE-JS
- AM19 SPORT-JS
- AM19 TREND-D AM19 TREND-DC
- AM19 STYLE-D AM19 STYLE-DC
- AM19 SPORT-D AM19 SPORT-DC MAGNIFICA CL222HV
- TS-# / RS-#: A separate side adapter must be provided.
- SP-X
- SR-6 / SR-7 / SR-7F / SR-11
- Sportster / Cross Sportster
- Armrest: 2 & 3
Recaro Seats (when used in conjunction with adapter-SL):
- SR
- SR2
- SR3
- SR4
- SR5
- L# Series
med Series (manually adjustable)
Recaro Seats (when used in conjunction with adapter-SJ):
- Style
- Sport
- Trend
- AM19 (manually adjustable)
Sparco Seats (when used in conjunction with adapter-S0-2):
- Monza
- Sportivo
- Speed
- Sprint
- Star
- Torino II
Cobra
- SFX
- Cub
- Roadstar
- Clubman
- Sprint
- Club Sports
- Daytona
- Sidewinder
- Imola 2
D&W Seats (when used in conjunction with adapter-SL)
Sabelt Seats (when used in conjunction with adapter-S0-2):
- Tiger
- Fox
- Crono
Blitz/Konig Seats (when used in conjunction with adapter-KB):
- GT2
- GT3
Corbeau Seats
Stout Seats
Compatibility is from maker for JDM cars only. We don't guarantee fitment. Always do your own research before purchase. After-sale support does not include installation support.
Honda Civic EU1 D15B (09/2000-09/2003)
Honda Civic EU3 D17A (09/2000-09/2003)
Honda Civic EU3 D17A (09/2003-09/2005)
Honda Civic Type-R EP3 K20A (12/2001-09/2003)
Honda Civic Type-R EP3 K20A (09/2003-09/2005)
Honda Civic EU1 D15B (09/2000-09/2003)
Honda Civic EU3 D17A (09/2000-09/2003)
Honda Civic EU3 D17A (09/2003-09/2005)
Honda Civic Type-R EP3 K20A (12/2001-09/2003)
Honda Civic Type-R EP3 K20A (09/2003-09/2005)
Customers who bought this product also purchased
Product Reviews
Submit a review now and earn 20 Reward points once the review is approved.
Applies only to registered customers, may vary when logged in.
“ THE CUSTOMER'S VOICE ”
RHDJapan Store Reviews
Just amazing the build quality and style Review by Ihsan
Very good quality bucket seat. Comfortable and adjustable. Arrived very well packaged and the carbon is of very good quality, high quality of manufacture. I highly recommend this product for purists and those who appreciate this type of seat. Expensive but it is worth it because it is the quality of manufacture and materials that you do not find on replica seats.
Great sounding exhaust Review by Dave
The exhaust sounds great! It has a refined tone and isn't going to upset the neighbours with loudness.
Kakimoto Racing Class KR Muffler Exhaust System Review by Sean
Nice sounding, not too loud just a deep undertone
Awesome partners Review by Sham
Awesome service overall and trustworthy.
HKS The World Review by ZeroIX
Fits my small hand, looks good and high quality.
